Lightsaber Star Wars Bluetooth Luke Force FX Heavy Dueling Metal hilt RGB

Lightsaber_Star_Wars_Bluetooth_Luke_Force_FX_Heavy_Dueling_Metal_hilt_RGB_01_aj
Lightsaber Star Wars Bluetooth Luke Force FX Heavy Dueling Metal hilt RGB
Lightsaber Star Wars Bluetooth Luke Force FX Heavy Dueling Metal hilt RGB
Lightsaber Star Wars Bluetooth Luke Force FX Heavy Dueling Metal hilt RGB
Lightsaber Star Wars Bluetooth Luke Force FX Heavy Dueling Metal hilt RGB
Lightsaber Star Wars Bluetooth Luke Force FX Heavy Dueling Metal hilt RGB
Lightsaber Star Wars Bluetooth Luke Force FX Heavy Dueling Metal hilt RGB
Lightsaber Star Wars Bluetooth Luke Force FX Heavy Dueling Metal hilt RGB
Lightsaber Star Wars Bluetooth Luke Force FX Heavy Dueling Metal hilt RGB
Lightsaber Star Wars Bluetooth Luke Force FX Heavy Dueling Metal hilt RGB
Lightsaber Star Wars Bluetooth Luke Force FX Heavy Dueling Metal hilt RGB
Lightsaber Star Wars Bluetooth Luke Force FX Heavy Dueling Metal hilt RGB

Lightsaber Star Wars Bluetooth Luke Force FX Heavy Dueling Metal hilt RGB
NOW BLUETOOTH COMPATIBLE WITH iOS AND ANDROID. XRGB3.0/XENO3.0, two great setups. Using the same board. The Xeno board was. Designed to support RGB base lit or a pixel setup. Upgrade your firmware through the app. SD Card for adding/editing fonts. 34 sound fonts preloaded. New accent swing sounds for better sound. Stab and spin sounds have been added. XENO3.0 has more blade effects and functions, and can support convert Pixel to RGB. Adjust the volume and brightness of the blade, check the battery percentage, and fine-tune the sensitivity of sensors with just a few taps. Plus, customize your blade length to enable effects like tip drag and melt, all at your fingertips. Our app also enables you to update and restore your saber to default settings effortlessly. And, with our sound theme settings, you can easily adjust the sound effects to your liking and play or pause your music tracks while battling it out. With more exciting updates coming soon, stay tuned for even more enhanced features and an incredible saber experience with Xenopixel V3.0. Thickness 2mm 92cm long OD 1 inch. Pre-power on, Blaster, Lock-up, Flash on clash, 12 sound set fonts, Quick Twist Font Change, Motion control. Volume Control, Infinite colour changing, Smooth Swing, FOC can be turned ON/OFF, Sleep Mode Aluminum alloys hilt, heavy duelling capable, Removable Battery, Rechargeable, Lockup?? L-Skywalker, Emperor, JUANSITH´S OBI EP III, DSR ElectricEssence, Angelic Plazma, JURASSIC, JUMP BIKE, STARGATE, ULTRON, THE BEGINNER, The Prize UnHinged, Sebulba, Dmaul, (Heavy). Hilt (Polished Alloy Metal). Allen Key and spare screws. Press and hold the LED button to bring out of sleep mode. You will hear a’Power On’ voice, and the LED button will turn on. The saber is now in Wake mode. Watch this LED when controlling the saber, as listed in the table below. Press the button once quickly, to turn the saber blade on. When lightsaber is on. Press button once quickly. Hold for 1 LED Flash (0.5 seconds). Press button once to end lock-up. Hold for 2 LED Flashes (1 second). Cycles all possible colors; press button once to select. Hold for 3 LED Flashes (1.5 seconds). Cycles major colors only; press button once to select. Hold for 4 LED Flashes (2 Seconds). Saber is still in Wake mode. When lightsaber is off. Follow instructions from page 1. Volume high, Volume low and Mute. Stable, Unstable, and Pulse. Motion controls on or off. Does not affect font change on twist. Flash On Clash Toggle. Turns on and off flash on impact. Hold for 5 LED Flashes (2.5 Seconds). Selects the next sound font on the board. Hold for 10 Seconds. Also occurs after idle for 10 minutes. Our team will work with you to resolve the problem and ensure your complete satisfaction. This is because sabers are designed for duelling and can incur damage during normal usage. At Strider Sabers, we are committed to providing the best quality products and customer service. Sometimes there are exceptions. Although the time frame may extend up to 20 days based on availability, weather, carrier issues or pandemics ETC.. Number and processing time. The item(s) pictured are the actual item(s) you will be receiving if you are the winner. For a return please message us asking for the return confirmation. CHECK OUT OUR OTHER ITEMS.
Lightsaber Star Wars Bluetooth Luke Force FX Heavy Dueling Metal hilt RGB

Star Wars Xenopixel Lightsaber Replica Force FX Heavy Dueling Metal Hilt

Star_Wars_Xenopixel_Lightsaber_Replica_Force_FX_Heavy_Dueling_Metal_Hilt_01_vif
Star Wars Xenopixel Lightsaber Replica Force FX Heavy Dueling Metal Hilt
Star Wars Xenopixel Lightsaber Replica Force FX Heavy Dueling Metal Hilt
Star Wars Xenopixel Lightsaber Replica Force FX Heavy Dueling Metal Hilt
Star Wars Xenopixel Lightsaber Replica Force FX Heavy Dueling Metal Hilt
Star Wars Xenopixel Lightsaber Replica Force FX Heavy Dueling Metal Hilt
Star Wars Xenopixel Lightsaber Replica Force FX Heavy Dueling Metal Hilt
Star Wars Xenopixel Lightsaber Replica Force FX Heavy Dueling Metal Hilt
Star Wars Xenopixel Lightsaber Replica Force FX Heavy Dueling Metal Hilt
Star Wars Xenopixel Lightsaber Replica Force FX Heavy Dueling Metal Hilt

Star Wars Xenopixel Lightsaber Replica Force FX Heavy Dueling Metal Hilt
Star Wars Force FX Lightsaber Replica Heavy Dueling Rechargeable Metal hilt. Power On, Blaster, Lock-up, Flash on clash, Quick Twist Font Change, Removable Battery, Removable electronic kit, Led strip lighting, heavy duelling capable, Sleep mode, Volume Control, Large sound 32 soundfont selection, Configurable settings and effects, Smooth Swing, Aluminum alloys hilt, PC blade Including SD card, Music, Motion control, Infinite color changing, FOC on/off, Rechargeable, Lockup. The chosen, New Horizon, The Dark Sword, The Dark Sword, The Assassin, The Knight, Wanderer, The Protector, The Dark Empress, The Son, The Third Hunter, The Master, The Dark Lord Order, Magenta, The Princess, Double Agent, Truly Lost, Wraith, The Senate, Redeemed, Bounty, The Count, codex of light, Cyber terror, Dark ages, Hatred, Idyll, Serenity, The Champion, The dark lord revisited, The Learner, the second, Teacher, whispers of power, Moon Field. Warp Ignition, Phaser Ignition, Broken Ignition, Stack ignition, Photon Ignition, Scavenger Ignition, Hunter Ignition, Ghost Blade, Blaster Blade, Standard, Blade, Flame Blade, Rainbow Blade, Unstable Blade, Pulse Blade, Infinite Drag. Hilt (Polished Alloy Metal). Allen Key and spare screws. This item is suitable for a variety of activities, including cosplay, training, sword fighting, and simply having fun. Its smooth swing over our RGB-X board makes it an excellent choice for those seeking the best board available on the market. A micro SD card is included with our board, allowing you to add a large library of sound fonts. Press and hold the LED button to bring out of sleep mode. You will hear a’Power On’ voice, and the LED button will turn on. Press the button once, quickly, to turn the blade on. The following controls activate when the blade is on, and are based. On the flash of the LED button light. 1 A quick press will initiate a single blaster deflect effect. 2 Press and hold the button for one flash, then release. This will initiate the drag effect. A quick press will end the drag effect. 3 Press and hold the button for two flashes, then release. This will initiate the color cycle. When the color you want shows, a quick press will end the color cycle. 4 Continue to hold the button past 2 flashes to turn off the blade. While the blade is off, the following controls are activated based on the flash of the LED button light. 1 Press and hold the button for one flash, then release. This will change the volume. There are 3 volume settings: Volume High, Volume Low, and Mute. 2 Press and hold the button for two flashes, then release. This will change the blade effect. There are 5 blade effects: Steady, Pulse, Rainbow Blade, Unstable, and Fire Blade. 3 Press and hold the button for three flashes, then release. This will change the blade mode. There are several blade modes, including Some pre-on effects. Blade effects will affect pre-ons, but will not have any effect on Blaster Blade and Ghost Blade modes. Only blade color and font selection impact these modes. 4 Press and hold the button for three flashes, then release. This will change the sound font. The selection of fonts can be customized by the user. There are several motion or manual controls available on the XenoPixel V2. 1 A direct and quick stabbing motion with the hilt level will turn the blade on, or off. 2A quick twist while the hilt is pointed down will change the font to the next on the list. Either direction will prompt the change as long as the hilt is pointed downward. 3A quick twist while the hilt is pointed up will play a music track, if one or more are available in the selected fonts folder. A quick twist again will stop the music. 4Hold the button and impact the hilt/blade to activate lockup. Release the button to end lockup. 5While holding the button, a quick twist while the hilt is pointed down will change the selected blade color. Release the button to select the current color. 6While holding the button, a quick twist while the hilt is pointed up will play a special effect. This will also play a sound if the correct file in included in the font. Our team will work with you to resolve the problem and ensure your complete satisfaction. This is because sabers are designed for duelling and can incur damage during normal usage. At Strider Sabers, we are committed to providing the best quality products and customer service. Sometimes there are exceptions. Although the time frame may extend up to 20 days based on availability, weather, carrier issues or pandemics ETC.. Number and processing time. The item(s) pictured are the actual item(s) you will be receiving if you are the winner. For a return please message us asking for the return confirmation. CHECK OUT OUR OTHER ITEMS. This item is in the category “Collectibles\Science Fiction & Horror\Star Wars Collectibles\Other Star Wars Collectibles”. The seller is “stridersabers” and is located in this country: CN. This item can be shipped to North, South, or Latin America.
  • Convention/Event: Star Wars Celebration
  • Movie: VII:The Force Awakens
  • Series: Clone Wars
  • Character: Kylo Ren
  • Year: 2022
  • Signed: No
  • Genre: Science Fiction & Horror
  • Franchise: Star Wars
  • Country/Region of Manufacture: China

Star Wars Xenopixel Lightsaber Replica Force FX Heavy Dueling Metal Hilt

Star Wars Lightsaber Replica Force FX Heavy Dueling Rechargeable Metal hilt RGB

Star_Wars_Lightsaber_Replica_Force_FX_Heavy_Dueling_Rechargeable_Metal_hilt_RGB_01_rldn
Star Wars Lightsaber Replica Force FX Heavy Dueling Rechargeable Metal hilt RGB
Star Wars Lightsaber Replica Force FX Heavy Dueling Rechargeable Metal hilt RGB
Star Wars Lightsaber Replica Force FX Heavy Dueling Rechargeable Metal hilt RGB
Star Wars Lightsaber Replica Force FX Heavy Dueling Rechargeable Metal hilt RGB
Star Wars Lightsaber Replica Force FX Heavy Dueling Rechargeable Metal hilt RGB
Star Wars Lightsaber Replica Force FX Heavy Dueling Rechargeable Metal hilt RGB
Star Wars Lightsaber Replica Force FX Heavy Dueling Rechargeable Metal hilt RGB
Star Wars Lightsaber Replica Force FX Heavy Dueling Rechargeable Metal hilt RGB
Star Wars Lightsaber Replica Force FX Heavy Dueling Rechargeable Metal hilt RGB
Star Wars Lightsaber Replica Force FX Heavy Dueling Rechargeable Metal hilt RGB
Star Wars Lightsaber Replica Force FX Heavy Dueling Rechargeable Metal hilt RGB

Star Wars Lightsaber Replica Force FX Heavy Dueling Rechargeable Metal hilt RGB
Thickness 2mm 92cm long OD 1 inch. Pre-power on, Blaster, Lock-up, Flash on clash, 12 sound set fonts, Quick Twist Font Change, Motion control. Volume Control, Infinite colour changing, Smooth Swing, FOC can be turned ON/OFF, Sleep Mode Aluminum alloys hilt, heavy duelling capable, Removable Battery, Rechargeable, Lockup?? L-Skywalker, Emperor, JUANSITH´S OBI EP III, DSR ElectricEssence, Angelic Plazma, JURASSIC, JUMP BIKE, STARGATE, ULTRON, THE BEGINNER, The Prize UnHinged, Sebulba, Dmaul, (Heavy). Hilt (Polished Alloy Metal). Allen Key and spare screws. Press and hold the LED button to bring out of sleep mode. You will hear a’Power On’ voice, and the LED button will turn on. The saber is now in Wake mode. Watch this LED when controlling the saber, as listed in the table below. Press the button once quickly, to turn the saber blade on. When lightsaber is on. Press button once quickly. Hold for 1 LED Flash (0.5 seconds). Press button once to end lock-up. Hold for 2 LED Flashes (1 second). Cycles all possible colors; press button once to select. Hold for 3 LED Flashes (1.5 seconds). Cycles major colors only; press button once to select. Hold for 4 LED Flashes (2 Seconds). Saber is still in Wake mode. When lightsaber is off. Follow instructions from page 1. Volume high, Volume low and Mute. Stable, Unstable, and Pulse. Motion controls on or off. Does not affect font change on twist. Flash On Clash Toggle. Turns on and off flash on impact. Hold for 5 LED Flashes (2.5 Seconds). Selects the next sound font on the board. Hold for 10 Seconds. Also occurs after idle for 10 minutes. Our team will work with you to resolve the problem and ensure your complete satisfaction. This is because sabers are designed for duelling and can incur damage during normal usage. At Strider Sabers, we are committed to providing the best quality products and customer service. Sometimes there are exceptions. Although the time frame may extend up to 20 days based on availability, weather, carrier issues or pandemics ETC.. Number and processing time. The item(s) pictured are the actual item(s) you will be receiving if you are the winner. For a return please message us asking for the return confirmation. CHECK OUT OUR OTHER ITEMS. This item is in the category “Collectibles\Science Fiction & Horror\Star Wars Collectibles\Lightsaber & Weapon Replicas”. The seller is “stridersabers” and is located in this country: CN. This item can be shipped to North, South, or Latin America.
  • Character: Luke Skywalker
  • Movie: VIII: The Last Jedi
  • Product Line: Force FX
  • Series: The Clone Wars
  • Type: Wand/Sword/Paraphernalia
  • Color: Black
  • Convention/Event: Star Wars Celebration
  • Brand: Striyder Sabers
  • Franchise: Star Wars
  • Genre: Science Fiction & Horror

Star Wars Lightsaber Replica Force FX Heavy Dueling Rechargeable Metal hilt RGB

Star Wars Lightsaber Replica Force FX Heavy Dueling Rechargeable Metal hilt RGB

Star_Wars_Lightsaber_Replica_Force_FX_Heavy_Dueling_Rechargeable_Metal_hilt_RGB_01_caf
Star Wars Lightsaber Replica Force FX Heavy Dueling Rechargeable Metal hilt RGB
Star Wars Lightsaber Replica Force FX Heavy Dueling Rechargeable Metal hilt RGB
Star Wars Lightsaber Replica Force FX Heavy Dueling Rechargeable Metal hilt RGB
Star Wars Lightsaber Replica Force FX Heavy Dueling Rechargeable Metal hilt RGB
Star Wars Lightsaber Replica Force FX Heavy Dueling Rechargeable Metal hilt RGB
Star Wars Lightsaber Replica Force FX Heavy Dueling Rechargeable Metal hilt RGB
Star Wars Lightsaber Replica Force FX Heavy Dueling Rechargeable Metal hilt RGB
Star Wars Lightsaber Replica Force FX Heavy Dueling Rechargeable Metal hilt RGB
Star Wars Lightsaber Replica Force FX Heavy Dueling Rechargeable Metal hilt RGB
Star Wars Lightsaber Replica Force FX Heavy Dueling Rechargeable Metal hilt RGB
Star Wars Lightsaber Replica Force FX Heavy Dueling Rechargeable Metal hilt RGB

Star Wars Lightsaber Replica Force FX Heavy Dueling Rechargeable Metal hilt RGB
Thickness 2mm 92cm long OD 1 inch. Pre-power on, Blaster, Lock-up, Flash on clash, 12 sound set fonts, Quick Twist Font Change, Motion control. Volume Control, Infinite colour changing, Smooth Swing, FOC can be turned ON/OFF, Sleep Mode Aluminum alloys hilt, heavy duelling capable, Removable Battery, Rechargeable, Lockup?? L-Skywalker, Emperor, JUANSITH´S OBI EP III, DSR ElectricEssence, Angelic Plazma, JURASSIC, JUMP BIKE, STARGATE, ULTRON, THE BEGINNER, The Prize UnHinged, Sebulba, Dmaul, (Heavy). Hilt (Polished Alloy Metal). Allen Key and spare screws. Press and hold the LED button to bring out of sleep mode. You will hear a’Power On’ voice, and the LED button will turn on. The saber is now in Wake mode. Watch this LED when controlling the saber, as listed in the table below. Press the button once quickly, to turn the saber blade on. When lightsaber is on. Press button once quickly. Hold for 1 LED Flash (0.5 seconds). Press button once to end lock-up. Hold for 2 LED Flashes (1 second). Cycles all possible colors; press button once to select. Hold for 3 LED Flashes (1.5 seconds). Cycles major colors only; press button once to select. Hold for 4 LED Flashes (2 Seconds). Saber is still in Wake mode. When lightsaber is off. Follow instructions from page 1. Volume high, Volume low and Mute. Stable, Unstable, and Pulse. Motion controls on or off. Does not affect font change on twist. Flash On Clash Toggle. Turns on and off flash on impact. Hold for 5 LED Flashes (2.5 Seconds). Selects the next sound font on the board. Hold for 10 Seconds. Also occurs after idle for 10 minutes. Our team will work with you to resolve the problem and ensure your complete satisfaction. This is because sabers are designed for duelling and can incur damage during normal usage. At Strider Sabers, we are committed to providing the best quality products and customer service. Sometimes there are exceptions. Although the time frame may extend up to 20 days based on availability, weather, carrier issues or pandemics ETC.. Number and processing time. The item(s) pictured are the actual item(s) you will be receiving if you are the winner. For a return please message us asking for the return confirmation. CHECK OUT OUR OTHER ITEMS. This item is in the category “Collectibles\Science Fiction & Horror\Star Wars Collectibles\Lightsaber & Weapon Replicas”. The seller is “stridersabers” and is located in this country: CN. This item can be shipped to North, South, or Latin America.
  • Convention/Event: Star Wars Celebration
  • Brand: Striyder Sabers
  • Movie: VII:The Force Awakens
  • Series: Clone Wars
  • Type: Wand/Sword/Paraphernalia
  • Character: Luke Skywalker
  • Color: Black
  • Genre: Science Fiction & Horror
  • Franchise: Star Wars
  • Product Line: Force FX

Star Wars Lightsaber Replica Force FX Heavy Dueling Rechargeable Metal hilt RGB

Star Wars Lightsaber Replica Force FX Heavy Dueling Rechargeable Metal hilt RGB

Star_Wars_Lightsaber_Replica_Force_FX_Heavy_Dueling_Rechargeable_Metal_hilt_RGB_01_rbsy
Star Wars Lightsaber Replica Force FX Heavy Dueling Rechargeable Metal hilt RGB
Star Wars Lightsaber Replica Force FX Heavy Dueling Rechargeable Metal hilt RGB
Star Wars Lightsaber Replica Force FX Heavy Dueling Rechargeable Metal hilt RGB
Star Wars Lightsaber Replica Force FX Heavy Dueling Rechargeable Metal hilt RGB
Star Wars Lightsaber Replica Force FX Heavy Dueling Rechargeable Metal hilt RGB
Star Wars Lightsaber Replica Force FX Heavy Dueling Rechargeable Metal hilt RGB
Star Wars Lightsaber Replica Force FX Heavy Dueling Rechargeable Metal hilt RGB
Star Wars Lightsaber Replica Force FX Heavy Dueling Rechargeable Metal hilt RGB
Star Wars Lightsaber Replica Force FX Heavy Dueling Rechargeable Metal hilt RGB
Star Wars Lightsaber Replica Force FX Heavy Dueling Rechargeable Metal hilt RGB
Star Wars Lightsaber Replica Force FX Heavy Dueling Rechargeable Metal hilt RGB
Star Wars Lightsaber Replica Force FX Heavy Dueling Rechargeable Metal hilt RGB
Star Wars Lightsaber Replica Force FX Heavy Dueling Rechargeable Metal hilt RGB

Star Wars Lightsaber Replica Force FX Heavy Dueling Rechargeable Metal hilt RGB
Thickness 2mm 92cm long OD 1 inch. Pre-power on, Blaster, Lock-up, Flash on clash, 12 sound set fonts, Quick Twist Font Change, Motion control. Volume Control, Infinite colour changing, Smooth Swing, FOC can be turned ON/OFF, Sleep Mode Aluminum alloys hilt, heavy duelling capable, Removable Battery, Rechargeable, Lockup?? L-Skywalker, Emperor, JUANSITH´S OBI EP III, DSR ElectricEssence, Angelic Plazma, JURASSIC, JUMP BIKE, STARGATE, ULTRON, THE BEGINNER, The Prize UnHinged, Sebulba, Dmaul, (Heavy). Hilt (Polished Alloy Metal). Allen Key and spare screws. Press and hold the LED button to bring out of sleep mode. You will hear a’Power On’ voice, and the LED button will turn on. The saber is now in Wake mode. Watch this LED when controlling the saber, as listed in the table below. Press the button once quickly, to turn the saber blade on. When lightsaber is on. Press button once quickly. Hold for 1 LED Flash (0.5 seconds). Press button once to end lock-up. Hold for 2 LED Flashes (1 second). Cycles all possible colors; press button once to select. Hold for 3 LED Flashes (1.5 seconds). Cycles major colors only; press button once to select. Hold for 4 LED Flashes (2 Seconds). Saber is still in Wake mode. When lightsaber is off. Follow instructions from page 1. Volume high, Volume low and Mute. Stable, Unstable, and Pulse. Motion controls on or off. Does not affect font change on twist. Flash On Clash Toggle. Turns on and off flash on impact. Hold for 5 LED Flashes (2.5 Seconds). Selects the next sound font on the board. Hold for 10 Seconds. Also occurs after idle for 10 minutes. Our team will work with you to resolve the problem and ensure your complete satisfaction. This is because sabers are designed for duelling and can incur damage during normal usage. At Strider Sabers, we are committed to providing the best quality products and customer service. Sometimes there are exceptions. Although the time frame may extend up to 20 days based on availability, weather, carrier issues or pandemics ETC.. Number and processing time. The item(s) pictured are the actual item(s) you will be receiving if you are the winner. For a return please message us asking for the return confirmation. CHECK OUT OUR OTHER ITEMS. This item is in the category “Collectibles\Science Fiction & Horror\Star Wars Collectibles\Lightsaber & Weapon Replicas”. The seller is “stridersabers” and is located in this country: CN. This item can be shipped to North, South, or Latin America.
  • Convention/Event: Star Wars Celebration
  • Brand: Striyder
  • Movie: VI:Return of the Jedi
  • Series: Clone Wars
  • Type: Wand/Sword/Paraphernalia
  • Character: Luke Skywalker
  • Year: 2022
  • Color: Silver
  • Franchise: Star Wars
  • Product Line: Force FX
  • Genre: Science Fiction & Horror

Star Wars Lightsaber Replica Force FX Heavy Dueling Rechargeable Metal hilt RGB

Star Wars Lightsaber Replica Force FX Heavy Dueling Rechargeable Metal Handle US

Star_Wars_Lightsaber_Replica_Force_FX_Heavy_Dueling_Rechargeable_Metal_Handle_US_01_pwk
Star Wars Lightsaber Replica Force FX Heavy Dueling Rechargeable Metal Handle US
Star Wars Lightsaber Replica Force FX Heavy Dueling Rechargeable Metal Handle US
Star Wars Lightsaber Replica Force FX Heavy Dueling Rechargeable Metal Handle US
Star Wars Lightsaber Replica Force FX Heavy Dueling Rechargeable Metal Handle US
Star Wars Lightsaber Replica Force FX Heavy Dueling Rechargeable Metal Handle US
Star Wars Lightsaber Replica Force FX Heavy Dueling Rechargeable Metal Handle US
Star Wars Lightsaber Replica Force FX Heavy Dueling Rechargeable Metal Handle US
Star Wars Lightsaber Replica Force FX Heavy Dueling Rechargeable Metal Handle US

Star Wars Lightsaber Replica Force FX Heavy Dueling Rechargeable Metal Handle US
Star Wars R G B Lightsaber. Material: Aluminum Alloy Metal Handle, Removable PC blade. Dimensions: Handle 28cm, Blade 25.4mm3mm82cm. Blade Color: 12 colors can be changed. Charging: USB fast charging for 4-8 hours. Charging voltage: 5V, USB cord to charge. Battery: 18650, 3.7V, 2000mah. Sound Fonts: 10 set sound effects. Volume Adjustment: Mute, Low – High Volume change. Safety System: Over charge protect, Over-load protect, Battery backwards protect system. 1 x USB charging cable. 1 x Kit bag. 1 x Instruction manual. Sound effect switching: In the shutdown state, press and hold the button for one second and then let go (flash once) to turn on the sound effect loop. Volume selection: After turning on the power, press and hold the button for three seconds and release (flash three times) and quickly press the button again to enter the volume selection mode. The three volume levels are cycled in sequence. When the desired volume is reached, release the button to select the volume. Memory function: light effect memory, sound effect memory. Not meant for Children under 6 years old no playing! This product is a LED luminous toy. Long time direct vision may affect your eyesight. The left and right screws of the handle of the hilt are fixed, and can be rotated. The screws on the handle are used to hold internal fittings. No dismantling is allowed. Thanks For Visiting My Store. Quality first, providing the best service. Customers are our friends. This item is in the category “Collectibles\Science Fiction & Horror\Star Wars Collectibles\Lightsaber & Weapon Replicas”. The seller is “ralphs333″ and is located in this country: US. This item can be shipped worldwide.
  • Convention/Event: Star Wars Celebration
  • Warning: Children Under 5 yrs no playing
  • Age Range: 6 yrs old
  • MPN: StarWarsRGB
  • Vintage: No
  • Handle Color: Black, Grey, Gold, Red, Blue
  • Features: Flashing, Swing on, 10 sets Sound fonts
  • Movie: VI:Return of the Jedi
  • Charging: USB Charging
  • Character: Luke Skywalker
  • Signed: No
  • Color: RGB
  • Material: Metal, Aluminium Alloy
  • Color of Blade: 12 Colors changing
  • Item Type: Lightsaber, Light saber
  • Featured Refinments: Replica Lightsaber
  • Franchise: Star Wars
  • Modified Item: No
  • Brand: Unbranded
  • Series: Clone Wars
  • Type: Toy
  • Year: 2022
  • Genre: Science Fiction & Horror
  • Country/Region of Manufacture: China
  • Dimentions: Handle 28cm,Blade 25.4mm*3mm*82cm
  • Product Line: Force FX

Star Wars Lightsaber Replica Force FX Heavy Dueling Rechargeable Metal Handle US

Star Wars Lightsaber Replica Force FX Heavy Dueling Rechargeable Metal Handle US

Star_Wars_Lightsaber_Replica_Force_FX_Heavy_Dueling_Rechargeable_Metal_Handle_US_01_qzzd
Star Wars Lightsaber Replica Force FX Heavy Dueling Rechargeable Metal Handle US
Star Wars Lightsaber Replica Force FX Heavy Dueling Rechargeable Metal Handle US
Star Wars Lightsaber Replica Force FX Heavy Dueling Rechargeable Metal Handle US
Star Wars Lightsaber Replica Force FX Heavy Dueling Rechargeable Metal Handle US
Star Wars Lightsaber Replica Force FX Heavy Dueling Rechargeable Metal Handle US
Star Wars Lightsaber Replica Force FX Heavy Dueling Rechargeable Metal Handle US
Star Wars Lightsaber Replica Force FX Heavy Dueling Rechargeable Metal Handle US

Star Wars Lightsaber Replica Force FX Heavy Dueling Rechargeable Metal Handle US
Star Wars R G B Lightsaber. Material: Aluminum Alloy Metal Handle, Removable PC blade. Dimensions: Handle 28cm, Blade 25.4mm2mm82cm. Blade Color: 12 colors can be changed. Charging: USB fast charging for 4-8 hours. Charging voltage: 5V, USB cord to charge. Battery: 18650, 3.7V, 3000mah. Sound Fonts: 10 set sound effects. Volume Adjustment: Mute, Low – High Volume change. Safety System: Over charge protect, Over-load protect, Battery backwards protect system. 1 x USB charging cable. 1 x Kit bag. 1 x Instruction manual. Sound effect switching: In the shutdown state, press and hold the button for one second and then let go (flash once) to turn on the sound effect loop. Volume selection: After turning on the power, press and hold the button for three seconds and release (flash three times) and quickly press the button again to enter the volume selection mode. The three volume levels are cycled in sequence. When the desired volume is reached, release the button to select the volume. Memory function: light effect memory, sound effect memory. Not meant for Children under 6 years old no playing! This product is a LED luminous toy. Long time direct vision may affect your eyesight. The left and right screws of the handle of the hilt are fixed, and can be rotated. The screws on the handle are used to hold internal fittings. No dismantling is allowed. Thanks For Visiting My Store. Quality first, providing the best service. Customers are our friends. This item is in the category “Collectibles\Science Fiction & Horror\Star Wars Collectibles\Lightsaber & Weapon Replicas”. The seller is “ralphs333″ and is located in this country: US. This item can be shipped worldwide.
  • Character: Luke Skywalker
  • Modified Item: No
  • Country/Region of Manufacture: China
  • Movie: VI:Return of the Jedi
  • Product Line: Force FX
  • Series: Clone Wars
  • Type: Toy
  • Dimentions: Handle 28cm,Blade 25.4mm*2mm*82cm
  • Warning: Children Under 5 yrs no playing
  • Year: 2022
  • MPN: StarWarsRGB
  • Material: Metal, Aluminium Alloy
  • Color: RGB
  • Vintage: No
  • Age Range: 6 yrs old
  • Charging: USB Charging
  • Color of Blade: 12 Colors changing
  • Features: Flashing, Swing on, 10 sets Sound fonts
  • Handle Color: Black, Grey, Gold, Red, Blue
  • Featured Refinments: Replica Lightsaber
  • Item Type: Lightsaber, Light saber
  • Convention/Event: Star Wars Celebration
  • Signed: No
  • Genre: Science Fiction & Horror
  • Brand: Unbranded
  • Franchise: Star Wars

Star Wars Lightsaber Replica Force FX Heavy Dueling Rechargeable Metal Handle US

Star Wars Lightsaber Replica Force FX RGB-X Heavy Dueling Rechargeable Metal

Star_Wars_Lightsaber_Replica_Force_FX_RGB_X_Heavy_Dueling_Rechargeable_Metal_01_xtc
Star Wars Lightsaber Replica Force FX RGB-X Heavy Dueling Rechargeable Metal
Star Wars Lightsaber Replica Force FX RGB-X Heavy Dueling Rechargeable Metal
Star Wars Lightsaber Replica Force FX RGB-X Heavy Dueling Rechargeable Metal
Star Wars Lightsaber Replica Force FX RGB-X Heavy Dueling Rechargeable Metal
Star Wars Lightsaber Replica Force FX RGB-X Heavy Dueling Rechargeable Metal
Star Wars Lightsaber Replica Force FX RGB-X Heavy Dueling Rechargeable Metal
Star Wars Lightsaber Replica Force FX RGB-X Heavy Dueling Rechargeable Metal
Star Wars Lightsaber Replica Force FX RGB-X Heavy Dueling Rechargeable Metal
Star Wars Lightsaber Replica Force FX RGB-X Heavy Dueling Rechargeable Metal
Star Wars Lightsaber Replica Force FX RGB-X Heavy Dueling Rechargeable Metal
Star Wars Lightsaber Replica Force FX RGB-X Heavy Dueling Rechargeable Metal

Star Wars Lightsaber Replica Force FX RGB-X Heavy Dueling Rechargeable Metal
Star Wars Lightsaber RGB-X Blade Baseilt Smooth Swing Metal Hilt Heavy Duelling. Is the Newest Version Upgraded from 9 to 12 fonts. Sometimes there are exceptions. Number and processing time. 12 sound set fonts. Quick Twist Font Change. FOC can be turned ON/OFF. Made for Heavy Duelling. Hilt (Polished Alloy Metal)-Size 27.5cm=. Blade-Thickness 2mm 92cm= 36 inches long. Allen Key and spare screws. We enjoy responding to questions and resolving any issues that arise. Press and hold the LED button to bring out of sleep mode. You will hear a’Power On’ voice, and the LED button will turn on. The saber is now in Wake mode. Watch this LED when controlling the saber, as listed in the table below. Press the button once quickly, to turn the saber blade on. When lightsaber is on. Press button once quickly. Hold for 1 LED Flash (0.5 seconds). Press button once to end lock-up. Hold for 2 LED Flashes (1 second). Cycles all possible colors; press button once to select. Hold for 3 LED Flashes (1.5 seconds). Cycles major colors only; press button once to select. Hold for 4 LED Flashes (2 Seconds). Saber is still in Wake mode. When lightsaber is off. Follow instructions from page 1. Volume high, Volume low and Mute. Stable, Unstable, and Pulse. Motion controls on or off. Does not affect font change on twist. Flash On Clash Toggle. Turns on and off flash on impact. Hold for 5 LED Flashes (2.5 Seconds). Selects the next sound font on the board. Hold for 10 Seconds. Also occurs after idle for 10 minutes. Includes coverage for flaws in original components and workmanship. We are fans of all things Star Wars, including cosplay, action figures, movies, and, of course, lightsabers. We could go on indefinitely. We understand the thrill of reenacting your favourite Star Wars character, duelling with friends and foes, and bragging about your newest Star Wars memorabilia to friends and family. This is why we bring our lightsabers to our customers so they can feel the same joy and awe that we do when wielding them. Our lightsabers are handcrafted with care to bring you closer to your favourite Star Wars character and even closer to the Force. We don’t just bring you high-quality premium lightsabers, we also collect, play with, and enjoy displaying them in our homes and offices. 14 years & up. Aluminum alloy 6063 hilt, Polycarbonate blade, Aluminium alloy 6063 hilt, Polycarbonate blade. Infinite colours with thousand kinds of colours. Lightsaber hilt, blade, USB charging cable. Time of charging & playing. 4-8 hours with a USB charging cable. High quality and the blade is very strong and will not break easily. 2-3 Watts, 4/8 ohm great quality. 92cm long 2mm thickness bullet tip, 1 inch OD removable blade. Backwards protect system, Overload system, Over discharge system. CE:BSTXD200414606402EC, RHOS:C200511029004. The R&D cost of the gravity sensor has been increased to make the smooth swing function more perfect. The sound effects have been expanded from 9 sets to 12, and 3 movie character lightsaber sound effects added to give you a more immersive duel experience. Developed and matched the motion control function, which was previously only available in the expensive Pixel models. You can also choose to turn on/off the function to decide whether to use button control or motion control. The FOC function has added the option to turn on/off. In previous version FOC function can only be turned on and cannot be turned off. But voice from fans, we know that FOC feature will make fans who participate in the competition miss out on points, so added is the on/off option so that you can turn off the FOC when you don’t need it. We want to insure that you receive your. May The Force Be With You. We thank you for your support. 100% Satisfaction, Customized and Superb Quality. The item(s) pictured are the actual item(s) you will be receiving if you are the winner. For a return please message us asking for the return confirmation. CHECK OUT OUR OTHER ITEMS. This item is in the category “Collectibles\Science Fiction & Horror\Star Wars Collectibles\Lightsaber & Weapon Replicas”. The seller is “stridersabers” and is located in this country: CN. This item can be shipped to North, South, or Latin America.
  • Convention/Event: Star Wars Celebration
  • Brand: Striyder Sabers
  • Movie: VIII: The Last Jedi
  • Series: The Clone Wars
  • Type: Wand/Sword/Paraphernalia
  • Character: Darth Vader
  • Color: Black
  • Franchise: Star Wars
  • Product Line: Force FX

Star Wars Lightsaber Replica Force FX RGB-X Heavy Dueling Rechargeable Metal

Star Wars Lightsaber RGB X Force FX Metal Hilt Heavy Dueling Smooth Swing

Star_Wars_Lightsaber_RGB_X_Force_FX_Metal_Hilt_Heavy_Dueling_Smooth_Swing_01_ibbf
Star Wars Lightsaber RGB X Force FX Metal Hilt Heavy Dueling Smooth Swing
Star Wars Lightsaber RGB X Force FX Metal Hilt Heavy Dueling Smooth Swing
Star Wars Lightsaber RGB X Force FX Metal Hilt Heavy Dueling Smooth Swing
Star Wars Lightsaber RGB X Force FX Metal Hilt Heavy Dueling Smooth Swing
Star Wars Lightsaber RGB X Force FX Metal Hilt Heavy Dueling Smooth Swing
Star Wars Lightsaber RGB X Force FX Metal Hilt Heavy Dueling Smooth Swing
Star Wars Lightsaber RGB X Force FX Metal Hilt Heavy Dueling Smooth Swing
Star Wars Lightsaber RGB X Force FX Metal Hilt Heavy Dueling Smooth Swing
Star Wars Lightsaber RGB X Force FX Metal Hilt Heavy Dueling Smooth Swing
Star Wars Lightsaber RGB X Force FX Metal Hilt Heavy Dueling Smooth Swing
Star Wars Lightsaber RGB X Force FX Metal Hilt Heavy Dueling Smooth Swing
Star Wars Lightsaber RGB X Force FX Metal Hilt Heavy Dueling Smooth Swing

Star Wars Lightsaber RGB X Force FX Metal Hilt Heavy Dueling Smooth Swing
Star Wars Lightsaber RGB Blade Baseilt Smooth Swing Metal Hilt Heavy Duelling. Is the Newest Version Upgraded from 9 to 12 fonts. 12 sound set fonts. Quick Twist Font Change. FOC can be turned ON/OFF. Made for Heavy Duelling. Hilt (Polished Alloy Metal)-Size 27.5cm=. Blade-Thickness 2mm 92cm= 36 inches long. Allen Key and spare screws. We enjoy responding to questions and resolving any issues that arise. Press and hold the LED button to bring out of sleep mode. You will hear a’Power On’ voice, and the LED button will turn on. The saber is now in Wake mode. Watch this LED when controlling the saber, as listed in the table below. Press the button once quickly, to turn the saber blade on. When lightsaber is on. Press button once quickly. Hold for 1 LED Flash (0.5 seconds). Press button once to end lock-up. Hold for 2 LED Flashes (1 second). Cycles all possible colors; press button once to select. Hold for 3 LED Flashes (1.5 seconds). Cycles major colors only; press button once to select. Hold for 4 LED Flashes (2 Seconds). Saber is still in Wake mode. When lightsaber is off. Follow instructions from page 1. Volume high, Volume low and Mute. Stable, Unstable, and Pulse. Motion controls on or off. Does not affect font change on twist. Flash On Clash Toggle. Turns on and off flash on impact. Hold for 5 LED Flashes (2.5 Seconds). Selects the next sound font on the board. Hold for 10 Seconds. Also occurs after idle for 10 minutes. Includes coverage for flaws in original components and workmanship. We are fans of all things Star Wars, including cosplay, action figures, movies, and, of course, lightsabers. We could go on indefinitely. We understand the thrill of reenacting your favourite Star Wars character, duelling with friends and foes, and bragging about your newest Star Wars memorabilia to friends and family. This is why we bring our lightsabers to our customers so they can feel the same joy and awe that we do when wielding them. Our lightsabers are handcrafted with care to bring you closer to your favourite Star Wars character and even closer to the Force. We don’t just bring you high-quality premium lightsabers, we also collect, play with, and enjoy displaying them in our homes and offices. 14 years & up. Aluminum alloy 6063 hilt, Polycarbonate blade, Aluminium alloy 6063 hilt, Polycarbonate blade. Infinite colours with thousand kinds of colours. Lightsaber hilt, blade, USB charging cable. Time of charging & playing. 4-8 hours with a USB charging cable. High quality and the blade is very strong and will not break easily. 2-3 Watts, 4/8 ohm great quality. 92cm long 2mm thickness bullet tip, 1 inch OD removable blade. Backwards protect system, Overload system, Over discharge system. CE:BSTXD200414606402EC, RHOS:C200511029004. The R&D cost of the gravity sensor has been increased to make the smooth swing function more perfect. The sound effects have been expanded from 9 sets to 12, and 3 movie character lightsaber sound effects added to give you a more immersive duel experience. Developed and matched the motion control function, which was previously only available in the expensive Pixel models. You can also choose to turn on/off the function to decide whether to use button control or motion control. The FOC function has added the option to turn on/off. In previous version FOC function can only be turned on and cannot be turned off. But voice from fans, we know that FOC feature will make fans who participate in the competition miss out on points, so added is the on/off option so that you can turn off the FOC when you don’t need it. We want to insure that you receive your. May The Force Be With You. We thank you for your support. 100% Satisfaction, Customized and Superb Quality. The item(s) pictured are the actual item(s) you will be receiving if you are the winner. For a return please message us asking for the return confirmation. CHECK OUT OUR OTHER ITEMS. This item is in the category “Collectibles\Science Fiction & Horror\Star Wars Collectibles\Lightsaber & Weapon Replicas”. The seller is “stridersabers” and is located in this country: US. This item can be shipped to Canada, United States.
  • Convention/Event: Star Wars Celebration
  • Brand: Striyder Sabers
  • Movie: VII:The Force Awakens
  • Series: The Clone Wars
  • Type: Wand/Sword/Paraphernalia
  • Character: Darth Vader
  • Color: Black Silver
  • Franchise: Star Wars
  • Modified Item: No
  • Product Line: Force FX

Star Wars Lightsaber RGB X Force FX Metal Hilt Heavy Dueling Smooth Swing

Star Wars Lightsaber RGB X Force FX Metal Hilt Heavy Dueling Smooth Swing

Star_Wars_Lightsaber_RGB_X_Force_FX_Metal_Hilt_Heavy_Dueling_Smooth_Swing_01_wjbr
Star Wars Lightsaber RGB X Force FX Metal Hilt Heavy Dueling Smooth Swing
Star Wars Lightsaber RGB X Force FX Metal Hilt Heavy Dueling Smooth Swing
Star Wars Lightsaber RGB X Force FX Metal Hilt Heavy Dueling Smooth Swing
Star Wars Lightsaber RGB X Force FX Metal Hilt Heavy Dueling Smooth Swing
Star Wars Lightsaber RGB X Force FX Metal Hilt Heavy Dueling Smooth Swing
Star Wars Lightsaber RGB X Force FX Metal Hilt Heavy Dueling Smooth Swing
Star Wars Lightsaber RGB X Force FX Metal Hilt Heavy Dueling Smooth Swing
Star Wars Lightsaber RGB X Force FX Metal Hilt Heavy Dueling Smooth Swing
Star Wars Lightsaber RGB X Force FX Metal Hilt Heavy Dueling Smooth Swing
Star Wars Lightsaber RGB X Force FX Metal Hilt Heavy Dueling Smooth Swing
Star Wars Lightsaber RGB X Force FX Metal Hilt Heavy Dueling Smooth Swing
Star Wars Lightsaber RGB X Force FX Metal Hilt Heavy Dueling Smooth Swing

Star Wars Lightsaber RGB X Force FX Metal Hilt Heavy Dueling Smooth Swing
Star Wars Lightsaber RGB-X Blade Baseilt Smooth Swing Metal Hilt Heavy Duelling. Is the Newest Version Upgraded from 9 to 12 fonts. 12 sound set fonts. Quick Twist Font Change. FOC can be turned ON/OFF. Made for Heavy Duelling. Hilt (Polished Alloy Metal)-Size 27.5cm=. Blade-Thickness 2mm 92cm= 36 inches long. Allen Key and spare screws. We enjoy responding to questions and resolving any issues that arise. Press and hold the LED button to bring out of sleep mode. You will hear a’Power On’ voice, and the LED button will turn on. The saber is now in Wake mode. Watch this LED when controlling the saber, as listed in the table below. Press the button once quickly, to turn the saber blade on. When lightsaber is on. Press button once quickly. Hold for 1 LED Flash (0.5 seconds). Press button once to end lock-up. Hold for 2 LED Flashes (1 second). Cycles all possible colors; press button once to select. Hold for 3 LED Flashes (1.5 seconds). Cycles major colors only; press button once to select. Hold for 4 LED Flashes (2 Seconds). Saber is still in Wake mode. When lightsaber is off. Follow instructions from page 1. Volume high, Volume low and Mute. Stable, Unstable, and Pulse. Motion controls on or off. Does not affect font change on twist. Flash On Clash Toggle. Turns on and off flash on impact. Hold for 5 LED Flashes (2.5 Seconds). Selects the next sound font on the board. Hold for 10 Seconds. Also occurs after idle for 10 minutes. Includes coverage for flaws in original components and workmanship. We are fans of all things Star Wars, including cosplay, action figures, movies, and, of course, lightsabers. We could go on indefinitely. We understand the thrill of reenacting your favourite Star Wars character, duelling with friends and foes, and bragging about your newest Star Wars memorabilia to friends and family. This is why we bring our lightsabers to our customers so they can feel the same joy and awe that we do when wielding them. Our lightsabers are handcrafted with care to bring you closer to your favourite Star Wars character and even closer to the Force. We don’t just bring you high-quality premium lightsabers, we also collect, play with, and enjoy displaying them in our homes and offices. 14 years & up. Aluminum alloy 6063 hilt, Polycarbonate blade, Aluminium alloy 6063 hilt, Polycarbonate blade. Infinite colours with thousand kinds of colours. Lightsaber hilt, blade, USB charging cable. Time of charging & playing. 4-8 hours with a USB charging cable. High quality and the blade is very strong and will not break easily. 2-3 Watts, 4/8 ohm great quality. 92cm long 2mm thickness bullet tip, 1 inch OD removable blade. Backwards protect system, Overload system, Over discharge system. CE:BSTXD200414606402EC, RHOS:C200511029004. The R&D cost of the gravity sensor has been increased to make the smooth swing function more perfect. The sound effects have been expanded from 9 sets to 12, and 3 movie character lightsaber sound effects added to give you a more immersive duel experience. Developed and matched the motion control function, which was previously only available in the expensive Pixel models. You can also choose to turn on/off the function to decide whether to use button control or motion control. The FOC function has added the option to turn on/off. In previous version FOC function can only be turned on and cannot be turned off. But voice from fans, we know that FOC feature will make fans who participate in the competition miss out on points, so added is the on/off option so that you can turn off the FOC when you don’t need it. We want to insure that you receive your. May The Force Be With You. We thank you for your support. 100% Satisfaction, Customized and Superb Quality. The item(s) pictured are the actual item(s) you will be receiving if you are the winner. For a return please message us asking for the return confirmation. CHECK OUT OUR OTHER ITEMS. This item is in the category “Collectibles\Science Fiction & Horror\Star Wars Collectibles\Lightsaber & Weapon Replicas”. The seller is “striydersabers” and is located in this country: US. This item can be shipped to Canada, United States.
  • Character: Darth Vader
  • Movie: VIII: The Last Jedi
  • Product Line: Force FX
  • Series: The Clone Wars
  • Type: Wand/Sword/Paraphernalia
  • Color: Black
  • Convention/Event: Star Wars Celebration
  • Brand: Striyder Sabers
  • Franchise: Star Wars

Star Wars Lightsaber RGB X Force FX Metal Hilt Heavy Dueling Smooth Swing