Efx Star Wars Celebration Death Star High Altitude Surface Modules Prop Signed

Efx_Star_Wars_Celebration_Death_Star_High_Altitude_Surface_Modules_Prop_Signed_01_wtkz
Efx Star Wars Celebration Death Star High Altitude Surface Modules Prop Signed
Efx Star Wars Celebration Death Star High Altitude Surface Modules Prop Signed
Efx Star Wars Celebration Death Star High Altitude Surface Modules Prop Signed
Efx Star Wars Celebration Death Star High Altitude Surface Modules Prop Signed
Efx Star Wars Celebration Death Star High Altitude Surface Modules Prop Signed
Efx Star Wars Celebration Death Star High Altitude Surface Modules Prop Signed
Efx Star Wars Celebration Death Star High Altitude Surface Modules Prop Signed
Efx Star Wars Celebration Death Star High Altitude Surface Modules Prop Signed
Efx Star Wars Celebration Death Star High Altitude Surface Modules Prop Signed
Efx Star Wars Celebration Death Star High Altitude Surface Modules Prop Signed
Efx Star Wars Celebration Death Star High Altitude Surface Modules Prop Signed
Efx Star Wars Celebration Death Star High Altitude Surface Modules Prop Signed

Efx Star Wars Celebration Death Star High Altitude Surface Modules Prop Signed
EFX STAR WARS CELEBRATION DEATH STAR HIGH ALTITUDE SURFACE MODULES SIGNED SEALED. 1977 surface model replica. Sealed in inner styrofoam packaging. Never removed from box. 2017 Star Wars celebration exclusive. Signed by model maker Steve Neisen. Steve makes the models for EFX and is a professional Hollywood model maker. Comes with certificate of authenticy, plaque and instructions. The modules were made in several scales to give the illusion of different altitudes over the Death Star surface. The largest modules were referred to as the low altitude tiles, as seen in the trench. The smaller modules were for the different altitudes of the epic battles between the tie fighters and xwings. No less attention to detail was given to these modules than the other models made. As with the models, these modules were made in the same process known as kit bashing. Thus, the details in the these modules are the same as the incredible models. The modules in this set are the “high altitude” square tiles in the medium altitude configuration. Each square was approximately 3″ x 3″. There were 14 different high altitude square tiles made and were molded in 2 sets, the first with tiles referred to as 1-6 and the second set 7-14. They were then cut up into many different variations, some with all 6 or 8 modules, all the way down to individual squares. They were then laid out on the sound stage floor to film the exciting dogfights over the Death Star. In some scenes, different sizes were used to give the surface more depth and detail. The EFX modules were cast from a set of original modules along with some original model parts to recreate the most accurate replicas of these iconic tiles. Steve Gawley, one of several ILM model makers to work on the modules, is shown setting up the Death Star surface set. Based on Joe Johnstons 3:4 view concept sketches, Steve attached the plan (top views) for the model shop to build from. Please inquire for rates. Images of planets are courtesy of NASA and STScI Hubble telescope website. Get Images that Make Supersized Seem Small. Auctiva’s Listing Templates improve your auctions in minutes. Attention Sellers – Get Templates Image Hosting, Scheduling at Auctiva. Track Page Views With. Auctiva’s FREE Counter. The item “EFX STAR WARS CELEBRATION DEATH STAR HIGH ALTITUDE SURFACE MODULES PROP SIGNED” is in sale since Saturday, May 25, 2019. This item is in the category “Entertainment Memorabilia\Movie Memorabilia\Props\Reproductions”. The seller is “collectorsgalleryonline_com” and is located in Sedalia, Missouri. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Taiwan, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Israel, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Colombia, Costa rica, Panama, Trinidad and tobago, Guatemala, Honduras, Jamaica, Brunei darussalam, Bolivia, Ecuador, Gibraltar, Guadeloupe, Iceland, Jordan, Cambodia, Sri lanka, Luxembourg, Maldives, Nicaragua, Peru, Pakistan, Paraguay, Viet nam, Uruguay, Russian federation.
Efx Star Wars Celebration Death Star High Altitude Surface Modules Prop Signed

Master Replicas Star Wars Thermal Detonator Weathered Prop ROTJ #269/1000

Master_Replicas_Star_Wars_Thermal_Detonator_Weathered_Prop_ROTJ_269_1000_01_dvh
Master Replicas Star Wars Thermal Detonator Weathered Prop ROTJ #269/1000
Master Replicas Star Wars Thermal Detonator Weathered Prop ROTJ #269/1000
Master Replicas Star Wars Thermal Detonator Weathered Prop ROTJ #269/1000
Master Replicas Star Wars Thermal Detonator Weathered Prop ROTJ #269/1000
Master Replicas Star Wars Thermal Detonator Weathered Prop ROTJ #269/1000

Master Replicas Star Wars Thermal Detonator Weathered Prop ROTJ #269/1000
Master Replicas Star Wars Thermal Detonator Weathered Prop ROTJ #269/1000. For sale is the Master Replicas Thermal Detonator – Weathered. What you see in the pics is what it comes with. The COA was lost in a move, but you get the Detonator prop, the case, the plaque and the original box the detonator came in. Works perfectly but stored without batteries. Awesome prop for sure! The item “Master Replicas Star Wars Thermal Detonator Weathered Prop ROTJ #269/1000″ is in sale since Tuesday, June 11, 2019. This item is in the category “Collectibles\Science Fiction & Horror\Star Wars Collectibles\Lightsaber & Weapon Replicas”. The seller is “madmax3″ and is located in Sonoma, California. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Indonesia, Taiwan, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Israel, Mexico, New Zealand, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Chile, Colombia, Costa rica, Panama, Guatemala, Honduras, Jamaica, Brunei darussalam, Bolivia, Gibraltar, Luxembourg, Pakistan, Reunion, Uruguay.
  • Brand: Master Replicas
  • Featured Characters: Star Wars
  • Modified Item: No
  • Type: Star Wars
  • Convention/Event: Star Wars Celebration

Master Replicas Star Wars Thermal Detonator Weathered Prop ROTJ #269/1000

Star Wars Universe Mandalorian Bounty Hunter DEFENDER Helmet Kit Prop Cosplay

Star_Wars_Universe_Mandalorian_Bounty_Hunter_DEFENDER_Helmet_Kit_Prop_Cosplay_01_lyz
Star Wars Universe Mandalorian Bounty Hunter DEFENDER Helmet Kit Prop Cosplay
Star Wars Universe Mandalorian Bounty Hunter DEFENDER Helmet Kit Prop Cosplay
Star Wars Universe Mandalorian Bounty Hunter DEFENDER Helmet Kit Prop Cosplay
Star Wars Universe Mandalorian Bounty Hunter DEFENDER Helmet Kit Prop Cosplay
Star Wars Universe Mandalorian Bounty Hunter DEFENDER Helmet Kit Prop Cosplay
Star Wars Universe Mandalorian Bounty Hunter DEFENDER Helmet Kit Prop Cosplay
Star Wars Universe Mandalorian Bounty Hunter DEFENDER Helmet Kit Prop Cosplay
Star Wars Universe Mandalorian Bounty Hunter DEFENDER Helmet Kit Prop Cosplay
Star Wars Universe Mandalorian Bounty Hunter DEFENDER Helmet Kit Prop Cosplay
Star Wars Universe Mandalorian Bounty Hunter DEFENDER Helmet Kit Prop Cosplay
Star Wars Universe Mandalorian Bounty Hunter DEFENDER Helmet Kit Prop Cosplay

Star Wars Universe Mandalorian Bounty Hunter DEFENDER Helmet Kit Prop Cosplay
Here is a fan made STAR WARS Universe Custom Mandalorian (“DEFENDER” Variant) FULL “T” Mando helmet kit. This helmet is full scale and can actually be worn. Helmet has been sanded, primed and ready to be painted! Visor (opening) has been removed and ready for Visor to be installed. The rangefinder parts have been included in the kit, but not permanently attached. All helmets that I make now have fiberglass strips cast in all the high stress areas for reinforcement! Last picture shows (without circuit board installed) this is how you will receive it. You can leave it with the standard Mando key slots or add the circuit board yourself! Helmet kit will include. Helmet trimmed (visor opening), sanded and primed. Pre-cut “T” visor lens smoke color (black). Ear cap cover w/mounting screws. Let me know and I will add to the invoice. Please wait for invoice if adding (visor installation). Zero-cool prop shop Is where You can find the install video I did on YOUTUBE for this helmet & Boba Fett. If you have any questions on how to finish or assemble your helmet/parts give me a shout. I will be happy to help. This will be a great addition to your STAR WARS collection. NOTE: If you miss out on this helmet please keep watching. I will be listing helmets every week in various levels of completion. If you have any questions, please ask. This helmet will come with tracking. Thank you for looking. The item “Star Wars Universe Mandalorian Bounty Hunter DEFENDER Helmet Kit Prop Cosplay” is in sale since Wednesday, March 20, 2019. This item is in the category “Collectibles\Science Fiction & Horror\Star Wars\Products, Non-Film Specific\Costumes, Masks”. The seller is “tommyboy-69″ and is located in Ashland City, Tennessee. This item can be shipped worldwide.
  • Character: Mandalorian
  • Country/Region of Manufacture: United States
  • Type: Helmet
  • Convention/Event: Star Wars Celebration
  • Featured Refinements: Star Wars Helmet

Star Wars Universe Mandalorian Bounty Hunter DEFENDER Helmet Kit Prop Cosplay

Efx Star Wars Celebration Death Star High Altitude Surface Modules Prop Signed

Efx_Star_Wars_Celebration_Death_Star_High_Altitude_Surface_Modules_Prop_Signed_01_xb
Efx Star Wars Celebration Death Star High Altitude Surface Modules Prop Signed
Efx Star Wars Celebration Death Star High Altitude Surface Modules Prop Signed
Efx Star Wars Celebration Death Star High Altitude Surface Modules Prop Signed
Efx Star Wars Celebration Death Star High Altitude Surface Modules Prop Signed
Efx Star Wars Celebration Death Star High Altitude Surface Modules Prop Signed
Efx Star Wars Celebration Death Star High Altitude Surface Modules Prop Signed
Efx Star Wars Celebration Death Star High Altitude Surface Modules Prop Signed
Efx Star Wars Celebration Death Star High Altitude Surface Modules Prop Signed
Efx Star Wars Celebration Death Star High Altitude Surface Modules Prop Signed
Efx Star Wars Celebration Death Star High Altitude Surface Modules Prop Signed
Efx Star Wars Celebration Death Star High Altitude Surface Modules Prop Signed
Efx Star Wars Celebration Death Star High Altitude Surface Modules Prop Signed

Efx Star Wars Celebration Death Star High Altitude Surface Modules Prop Signed
EFX STAR WARS CELEBRATION DEATH STAR HIGH ALTITUDE SURFACE MODULES SIGNED SEALED. 1977 surface model replica. Sealed in inner styrofoam packaging. Never removed from box. 2017 Star Wars celebration exclusive. Signed by model maker Steve Neisen. Steve makes the models for EFX and is a professional Hollywood model maker. Comes with certificate of authenticy, plaque and instructions. The modules were made in several scales to give the illusion of different altitudes over the Death Star surface. The largest modules were referred to as the low altitude tiles, as seen in the trench. The smaller modules were for the different altitudes of the epic battles between the tie fighters and xwings. No less attention to detail was given to these modules than the other models made. As with the models, these modules were made in the same process known as kit bashing. Thus, the details in the these modules are the same as the incredible models. The modules in this set are the “high altitude” square tiles in the medium altitude configuration. Each square was approximately 3″ x 3″. There were 14 different high altitude square tiles made and were molded in 2 sets, the first with tiles referred to as 1-6 and the second set 7-14. They were then cut up into many different variations, some with all 6 or 8 modules, all the way down to individual squares. They were then laid out on the sound stage floor to film the exciting dogfights over the Death Star. In some scenes, different sizes were used to give the surface more depth and detail. The EFX modules were cast from a set of original modules along with some original model parts to recreate the most accurate replicas of these iconic tiles. Steve Gawley, one of several ILM model makers to work on the modules, is shown setting up the Death Star surface set. Based on Joe Johnstons 3:4 view concept sketches, Steve attached the plan (top views) for the model shop to build from. Please inquire for rates. Images of planets are courtesy of NASA and STScI Hubble telescope website. Get Images that Make Supersized Seem Small. Auctiva’s Listing Templates improve your auctions in minutes. Attention Sellers – Get Templates Image Hosting, Scheduling at Auctiva. Track Page Views With. Auctiva’s FREE Counter. The item “EFX STAR WARS CELEBRATION DEATH STAR HIGH ALTITUDE SURFACE MODULES PROP SIGNED” is in sale since Monday, April 15, 2019. This item is in the category “Entertainment Memorabilia\Movie Memorabilia\Props\Reproductions”. The seller is “collectorsgalleryonline_com” and is located in Sedalia, Missouri. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Taiwan, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Israel, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Colombia, Costa rica, Panama, Trinidad and tobago, Guatemala, Honduras, Jamaica, Brunei darussalam, Bolivia, Ecuador, Gibraltar, Guadeloupe, Iceland, Jordan, Cambodia, Sri lanka, Luxembourg, Maldives, Nicaragua, Peru, Pakistan, Paraguay, Viet nam, Uruguay, Russian federation.
Efx Star Wars Celebration Death Star High Altitude Surface Modules Prop Signed

Star Wars Mando Bounty Hunter Mandowar Mandalorian Merc Cosplay Helmet Prop

Star_Wars_Mando_Bounty_Hunter_Mandowar_Mandalorian_Merc_Cosplay_Helmet_Prop_01_nj
Star Wars Mando Bounty Hunter Mandowar Mandalorian Merc Cosplay Helmet Prop
Star Wars Mando Bounty Hunter Mandowar Mandalorian Merc Cosplay Helmet Prop
Star Wars Mando Bounty Hunter Mandowar Mandalorian Merc Cosplay Helmet Prop
Star Wars Mando Bounty Hunter Mandowar Mandalorian Merc Cosplay Helmet Prop
Star Wars Mando Bounty Hunter Mandowar Mandalorian Merc Cosplay Helmet Prop
Star Wars Mando Bounty Hunter Mandowar Mandalorian Merc Cosplay Helmet Prop
Star Wars Mando Bounty Hunter Mandowar Mandalorian Merc Cosplay Helmet Prop
Star Wars Mando Bounty Hunter Mandowar Mandalorian Merc Cosplay Helmet Prop
Star Wars Mando Bounty Hunter Mandowar Mandalorian Merc Cosplay Helmet Prop
Star Wars Mando Bounty Hunter Mandowar Mandalorian Merc Cosplay Helmet Prop
Star Wars Mando Bounty Hunter Mandowar Mandalorian Merc Cosplay Helmet Prop
Star Wars Mando Bounty Hunter Mandowar Mandalorian Merc Cosplay Helmet Prop

Star Wars Mando Bounty Hunter Mandowar Mandalorian Merc Cosplay Helmet Prop
Here is a fan made (by me) STAR WARS Universe Mandalorian Mando helmet kit. This helmet is full scale and can actually be worn. Helmet has been sanded, primed and ready to be painted! Visor (opening) has already been removed. Helmet comes with 2 antennas and bases. They will come loose and can be placed anywhere on the helmet. The helmet is cast out of resin urethane plastic reinforced with fiberglass strips at all the stress points. Great for trooping and cosplay. This is a durable bucket and will last a very long time! This helmet kit will include. Helmet trimmed, sanded and primed. Pre cut visor lens smoke color (black). (2) Antennas with bases. I will also be offering a version of this helmet with a 2/3 partial T visor cut out. This helmet will be in a separate listing. This helmet will fit up to about a 26 head and will have plenty of room for electronics. Let me know and I will add to the invoice. Please wait for invoice if adding (visor installation). Zero-cool prop shop Is where You can find the install video I did on YOUTUBE for this helmet & Boba Fett. If you have any questions on how to finish or assemble your helmet/parts give me a shout. I will be happy to help. This will be a great addition to your STAR WARS Helmet collection. NOTE: If you miss out on this helmet please keep watching. I will be listing helmets every week in various levels of completion. If you have any questions, please ask. This helmet will come with tracking. Thank you for looking. The item “Star Wars Mando Bounty Hunter Mandowar Mandalorian Merc Cosplay Helmet Prop” is in sale since Monday, April 15, 2019. This item is in the category “Collectibles\Science Fiction & Horror\Star Wars\Products, Non-Film Specific\Costumes, Masks”. The seller is “tommyboy-69″ and is located in Ashland City, Tennessee. This item can be shipped worldwide.
  • Character: Mandalorian
  • Country/Region of Manufacture: United States
  • Type: Mando Helmet
  • Convention/Event: Star Wars Celebration
  • Featured Refinements: Star Wars Helmet

Star Wars Mando Bounty Hunter Mandowar Mandalorian Merc Cosplay Helmet Prop

Efx Star Wars Celebration Death Star High Altitude Surface Modules Prop

Efx_Star_Wars_Celebration_Death_Star_High_Altitude_Surface_Modules_Prop_01_op
Efx Star Wars Celebration Death Star High Altitude Surface Modules Prop

Efx Star Wars Celebration Death Star High Altitude Surface Modules Prop
EFX STAR WARS CELEBRATION DEATH STAR HIGH ALTITUDE SURFACE MODULES PROP Had on display and still in minty condition. Please contact before purchasing if outside USA. The item “EFX STAR WARS CELEBRATION DEATH STAR HIGH ALTITUDE SURFACE MODULES PROP” is in sale since Sunday, February 10, 2019. This item is in the category “Entertainment Memorabilia\Movie Memorabilia\Props\Reproductions”. The seller is “dishdog” and is located in Plattsburg, Missouri. This item can be shipped to United States.
Efx Star Wars Celebration Death Star High Altitude Surface Modules Prop

Star Wars Mandalorian Bounty Hunter ESB- ROTJ BOBA FETT Cosplay Helmet Prop Lot

Star_Wars_Mandalorian_Bounty_Hunter_ESB_ROTJ_BOBA_FETT_Cosplay_Helmet_Prop_Lot_01_vbq
Star Wars Mandalorian Bounty Hunter ESB- ROTJ BOBA FETT Cosplay Helmet Prop Lot
Star Wars Mandalorian Bounty Hunter ESB- ROTJ BOBA FETT Cosplay Helmet Prop Lot
Star Wars Mandalorian Bounty Hunter ESB- ROTJ BOBA FETT Cosplay Helmet Prop Lot
Star Wars Mandalorian Bounty Hunter ESB- ROTJ BOBA FETT Cosplay Helmet Prop Lot
Star Wars Mandalorian Bounty Hunter ESB- ROTJ BOBA FETT Cosplay Helmet Prop Lot
Star Wars Mandalorian Bounty Hunter ESB- ROTJ BOBA FETT Cosplay Helmet Prop Lot
Star Wars Mandalorian Bounty Hunter ESB- ROTJ BOBA FETT Cosplay Helmet Prop Lot
Star Wars Mandalorian Bounty Hunter ESB- ROTJ BOBA FETT Cosplay Helmet Prop Lot
Star Wars Mandalorian Bounty Hunter ESB- ROTJ BOBA FETT Cosplay Helmet Prop Lot
Star Wars Mandalorian Bounty Hunter ESB- ROTJ BOBA FETT Cosplay Helmet Prop Lot
Star Wars Mandalorian Bounty Hunter ESB- ROTJ BOBA FETT Cosplay Helmet Prop Lot

Star Wars Mandalorian Bounty Hunter ESB- ROTJ BOBA FETT Cosplay Helmet Prop Lot
This is a accurate fan made by me STAR WARS Boba Fett cosplay helmet kit. This helmet is full scale and can actually be worn. It has been sanded and primed but will still require some. Visor opening has been removed and trimmed. The range finder parts have been included in the kit, but not permanently attached. Range finder stem/stalk is cast with a metal rod inside to reinforce for strength! All helmets that I make now have fiberglass strips cast in all the high stress areas for reinforcement! Helmet kit will include. Helmet trimmed (visor opening), sanded and primed. Pre-cut visor lens smoke color (black). Ear cap cover w/mounting screws. This Kit comes with everything you need to complete helmet!! (the First picture has visor lens in place for reference to show darkness of lens). Wait for invoice before paying if you want visor installed! If you have any questions on how to finish or assemble your helmet/parts give me a shout. I will be happy to help. This will be a great addition to your STAR WARS helmet collection. NOTE: If you miss out on this helmet please keep watching. I will be listing helmets every week in various levels of completion. If you want to see pictures of other helmets I have made or have offers please look me up on facebook at Zero-Cool Prop Shop. If you have any questions, please ask. This helmet will come with tracking. Thank you for looking. The item “Star Wars Mandalorian Bounty Hunter ESB- ROTJ BOBA FETT Cosplay Helmet Prop Lot” is in sale since Thursday, May 2, 2019. This item is in the category “Collectibles\Science Fiction & Horror\Star Wars\Products, Non-Film Specific\Costumes, Masks”. The seller is “tommyboy-69″ and is located in Ashland City, Tennessee. This item can be shipped worldwide.
  • Character: Boba Fett
  • Country/Region of Manufacture: United States
  • Type: Helmet
  • Convention/Event: Star Wars Celebration
  • Featured Refinements: Boba Fett Helmet

Star Wars Mandalorian Bounty Hunter ESB- ROTJ BOBA FETT Cosplay Helmet Prop Lot

Efx Star Wars Celebration Death Star High Altitude Surface Modules Prop Sealed

Efx_Star_Wars_Celebration_Death_Star_High_Altitude_Surface_Modules_Prop_Sealed_01_ss
Efx Star Wars Celebration Death Star High Altitude Surface Modules Prop Sealed
Efx Star Wars Celebration Death Star High Altitude Surface Modules Prop Sealed
Efx Star Wars Celebration Death Star High Altitude Surface Modules Prop Sealed

Efx Star Wars Celebration Death Star High Altitude Surface Modules Prop Sealed
Up for sale is an eFX Star Wars Death Star Module Set no. Item is in original box and has never been opened. The item “EFX STAR WARS CELEBRATION DEATH STAR HIGH ALTITUDE SURFACE MODULES PROP SEALED” is in sale since Friday, September 29, 2017. This item is in the category “Entertainment Memorabilia\Movie Memorabilia\Props\Reproductions”. The seller is “president_skroob” and is located in West Islip, New York. This item can be shipped to United States.
Efx Star Wars Celebration Death Star High Altitude Surface Modules Prop Sealed