Star Wars Lightsaber Force FX Xenopixel Metal Hilt Hydra Saber 34 Fonts

Star Wars Lightsaber Force FX Xenopixel Metal Hilt Hydra Saber 34 Fonts Smoothswing Infinite blade colors. The latest saber in our arsonal. This Saber is 1 hilt that holds two awesome blades. 2mm thickness 92cm long OD 7/8 inch. Sometimes there are exceptions. Number and processing time. LED strip lighting in blade. Configurable settings and effects. Quick Twist Font Change. FOC can be turned ON/OFF. 3600Mah 18650 3.7V Safety protected battery. 2-3 Watts 4/8 ohm speaker great quality. Cal Kestis, Darth Vader. Hilt (Polished Alloy Metal). Allen Key and spare screws. Press and hold the LED button to bring out of sleep mode. You will hear a’Power On’ voice, and the LED button will turn on. Press the button once, quickly, to turn the blade on. The following controls activate when the blade is on, and are based. On the flash of the LED button light. 1 A quick press will initiate a single blaster deflect effect. 2 Press and hold the button for one flash, then release. This will initiate the drag effect. A quick press will end the drag effect. 3 Press and hold the button for two flashes, then release. This will initiate the color cycle. When the color you want shows, a quick press will end the color cycle. 4 Continue to hold the button past 2 flashes to turn off the blade. While the blade is off, the following controls are activated based on the flash of the LED button light. 1 Press and hold the button for one flash, then release. This will change the volume. There are 3 volume settings: Volume High, Volume Low, and Mute. 2 Press and hold the button for two flashes, then release. This will change the blade effect. There are 5 blade effects: Steady, Pulse, Rainbow Blade, Unstable, and Fire Blade. 3 Press and hold the button for three flashes, then release. This will change the blade mode. There are several blade modes, including Some pre-on effects. Blade effects will affect pre-ons, but will not have any effect on Blaster Blade and Ghost Blade modes. Only blade color and font selection impact these modes. 4 Press and hold the button for three flashes, then release. This will change the sound font. The selection of fonts can be customized by the user. There are several motion or manual controls available on the XenoPixel V2. 1 A direct and quick stabbing motion with the hilt level will turn the blade on, or off. 2A quick twist while the hilt is pointed down will change the font to the next on the list. Either direction will prompt the change as long as the hilt is pointed downward. 3A quick twist while the hilt is pointed up will play a music track, if one or more are available in the selected fonts folder. A quick twist again will stop the music. 4Hold the button and impact the hilt/blade to activate lockup. Release the button to end lockup. 5While holding the button, a quick twist while the hilt is pointed down will change the selected blade color. Release the button to select the current color. 6While holding the button, a quick twist while the hilt is pointed up will play a special effect. This will also play a sound if the correct file in included in the font. Pixelated LED strip inside blade. Aluminum alloy 6063 hilt, Polycarbonate blade, Aluminium alloy 6063 hilt, Polycarbonate blade. Infinite colours with thousand kinds of colours. Time of charging & playing. 4-8 hours with a USB charging cable. High quality and the blade is very strong and will not break easily. 92cm long 2mm thickness bullet tip, 1 inch OD removable blade. Backwards protect system, Overload system, Over discharge system. CE:BSTXD200414606402EC, RHOS:C200511029004. We are fans of all things Star Wars, including cosplay, action figures, movies, and, of course, lightsabers. We could go on indefinitely. We don’t just bring you high-quality premium lightsabers, we also collect, play with, and enjoy displaying them in our homes and offices. We understand the thrill of reenacting your favourite Star Wars character, duelling with friends and foes, and bragging about your newest Star Wars memorabilia to friends and family. This is why we bring our lightsabers to our customers so they can feel the same joy and awe that we do when wielding them. Our lightsabers are handcrafted with care to bring you closer to your favourite Star Wars character and even closer to the Force. We enjoy responding to questions and resolving any issues that arise. Includes coverage for flaws in original components and workmanship. We want to insure that you receive your. May The Force Be With You. We thank you for your support. 100% Satisfaction, Customized and Superb Quality. The item(s) pictured are the actual item(s) you will be receiving if you are the winner. For a return please message us asking for the return confirmation. CHECK OUT OUR OTHER ITEMS. This item is in the category “Collectibles\Science Fiction & Horror\Star Wars Collectibles\Lightsaber & Weapon Replicas”. The seller is “stridersabers” and is located in this country: CN. This item can be shipped to North, South, or Latin America.

Convention/Event: Star Wars Celebration
Series: The Clone Wars
Movie: VII:The Force Awakens
Type: Wand/Sword/Paraphernalia
Character: Kylo Ren
Year: 2022
Color: silver
Country/Region of Manufacture: China
Modified Item: No
Product Line: Force FX
Vintage: No

Star Wars Lightsaber Force FX Xenopixel Metal Hilt Motion Control 34 Fonts

Star Wars Lightsaber Force FX Metal Hilt Xenopixel 34 Fonts. Sometimes there are exceptions. Number and processing time. LED strip lighting in blade. Configurable settings and effects. Quick Twist Font Change. FOC can be turned ON/OFF. 3600Mah 18650 3.7V Safety protected battery. 2-3 Watts 4/8 ohm speaker great quality. Cal Kestis, Darth Vader. Hilt (Polished Alloy Metal). Allen Key and spare screws. Press and hold the LED button to bring out of sleep mode. You will hear a’Power On’ voice, and the LED button will turn on. Press the button once, quickly, to turn the blade on. The following controls activate when the blade is on, and are based. On the flash of the LED button light. 1 A quick press will initiate a single blaster deflect effect. 2 Press and hold the button for one flash, then release. This will initiate the drag effect. A quick press will end the drag effect. 3 Press and hold the button for two flashes, then release. This will initiate the color cycle. When the color you want shows, a quick press will end the color cycle. 4 Continue to hold the button past 2 flashes to turn off the blade. While the blade is off, the following controls are activated based on the flash of the LED button light. 1 Press and hold the button for one flash, then release. This will change the volume. There are 3 volume settings: Volume High, Volume Low, and Mute. 2 Press and hold the button for two flashes, then release. This will change the blade effect. There are 5 blade effects: Steady, Pulse, Rainbow Blade, Unstable, and Fire Blade. 3 Press and hold the button for three flashes, then release. This will change the blade mode. There are several blade modes, including Some pre-on effects. Blade effects will affect pre-ons, but will not have any effect on Blaster Blade and Ghost Blade modes. Only blade color and font selection impact these modes. 4 Press and hold the button for three flashes, then release. This will change the sound font. The selection of fonts can be customized by the user. There are several motion or manual controls available on the XenoPixel V2. 1 A direct and quick stabbing motion with the hilt level will turn the blade on, or off. 2A quick twist while the hilt is pointed down will change the font to the next on the list. Either direction will prompt the change as long as the hilt is pointed downward. 3A quick twist while the hilt is pointed up will play a music track, if one or more are available in the selected fonts folder. A quick twist again will stop the music. 4Hold the button and impact the hilt/blade to activate lockup. Release the button to end lockup. 5While holding the button, a quick twist while the hilt is pointed down will change the selected blade color. Release the button to select the current color. 6While holding the button, a quick twist while the hilt is pointed up will play a special effect. This will also play a sound if the correct file in included in the font. 50Watt LED Pixelated led strip inside the blade. Aluminum alloy 6063 hilt, Polycarbonate blade, Aluminium alloy 6063 hilt, Polycarbonate blade. Infinite colours with thousand kinds of colours. Time of charging & playing. 4-8 hours with a USB charging cable. High quality and the blade is very strong and will not break easily. 92cm long 2mm thickness bullet tip, 1 inch OD removable blade. Backwards protect system, Overload system, Over discharge system. CE:BSTXD200414606402EC, RHOS:C200511029004. We are fans of all things Star Wars, including cosplay, action figures, movies, and, of course, lightsabers. We could go on indefinitely. We don’t just bring you high-quality premium lightsabers, we also collect, play with, and enjoy displaying them in our homes and offices. We understand the thrill of reenacting your favourite Star Wars character, duelling with friends and foes, and bragging about your newest Star Wars memorabilia to friends and family. This is why we bring our lightsabers to our customers so they can feel the same joy and awe that we do when wielding them. Our lightsabers are handcrafted with care to bring you closer to your favourite Star Wars character and even closer to the Force. We enjoy responding to questions and resolving any issues that arise. Includes coverage for flaws in original components and workmanship. We want to insure that you receive your precious cargo. May The Force Be With You. We thank you for your support. 100% Satisfaction, Customized and Superb Quality. The item(s) pictured are the actual item(s) you will be receiving if you are the winner. For a return please message us asking for the return confirmation. CHECK OUT OUR OTHER ITEMS. This item is in the category “Collectibles\Science Fiction & Horror\Star Wars Collectibles\Other Star Wars Collectibles”. The seller is “stridersabers” and is located in this country: CN. This item can be shipped to North, South, or Latin America.

Convention/Event: Star Wars Celebration
Movie: IV:Star Wars
Series: The Mandalorian
Character: Darth Vader
Year: 2022
Modified Item: No
Vintage: No

Star Wars Lightsaber Force FX Metal Hilt Qui-Gon Pixel Xenopixel 34 Fonts

Star Wars Lightsaber Force FX Metal Hilt Star Wars Lightsaber Force FX Metal Hilt. Neo Replica Xenopixel 34 Fonts. 1-2 weeks, may be faster in United States, 1-3 weeks in Canada. We kindly ask for your understanding as we take the necessary time to ensure that your lightsaber is of the calibre you anticipate as we take all orders extremely serious. LED strip lighting in blade. Configurable settings and effects. Quick Twist Font Change. FOC can be turned ON/OFF. 3600Mah 18650 3.7V Safety protected battery. 2-3 Watts 4/8 ohm speaker great quality. Cal Kestis, Darth Vader. Usb type C charging cable. Hilt (Polished Alloy Metal). Allen Key and spare screws. Press and hold the LED button to bring out of sleep mode. You will hear a’Power On’ voice, and the LED button will turn on. Press the button once, quickly, to turn the blade on. The following controls activate when the blade is on, and are based. On the flash of the LED button light. 1 A quick press will initiate a single blaster deflect effect. 2 Press and hold the button for one flash, then release. This will initiate the drag effect. A quick press will end the drag effect. 3 Press and hold the button for two flashes, then release. This will initiate the color cycle. When the color you want shows, a quick press will end the color cycle. 4 Continue to hold the button past 2 flashes to turn off the blade. While the blade is off, the following controls are activated based on the flash of the LED button light. 1 Press and hold the button for one flash, then release. This will change the volume. There are 3 volume settings: Volume High, Volume Low, and Mute. 2 Press and hold the button for two flashes, then release. This will change the blade effect. There are 5 blade effects: Steady, Pulse, Rainbow Blade, Unstable, and Fire Blade. 3 Press and hold the button for three flashes, then release. This will change the blade mode. There are several blade modes, including Some pre-on effects. Blade effects will affect pre-ons, but will not have any effect on Blaster Blade and Ghost Blade modes. Only blade color and font selection impact these modes. 4 Press and hold the button for three flashes, then release. This will change the sound font. The selection of fonts can be customized by the user. There are several motion or manual controls available on the XenoPixel V2. 1 A direct and quick stabbing motion with the hilt level will turn the blade on, or off. 2A quick twist while the hilt is pointed down will change the font to the next on the list. Either direction will prompt the change as long as the hilt is pointed downward. 3A quick twist while the hilt is pointed up will play a music track, if one or more are available in the selected fonts folder. A quick twist again will stop the music. 4Hold the button and impact the hilt/blade to activate lockup. Release the button to end lockup. 5While holding the button, a quick twist while the hilt is pointed down will change the selected blade color. Release the button to select the current color. 6While holding the button, a quick twist while the hilt is pointed up will play a special effect. This will also play a sound if the correct file in included in the font. 50Watt neo pixel strip. Aluminum alloy 6063 hilt, Polycarbonate blade, Aluminium alloy 6063 hilt, Polycarbonate blade. Infinite colours with thousand kinds of colours. Time of charging & playing. 4-8 hours with a USB charging cable. High quality and the blade is very strong and will not break easily. 92cm long 2mm thickness bullet tip, 1 inch OD removable blade. Backwards protect system, Overload system, Over discharge system. CE:BSTXD200414606402EC, RHOS:C200511029004. We are fans of all things Star Wars, including cosplay, action figures, movies, and, of course, lightsabers. We could go on indefinitely. We don’t just bring you high-quality premium lightsabers, we also collect, play with, and enjoy displaying them in our homes and offices. We understand the thrill of reenacting your favourite Star Wars character, duelling with friends and foes, and bragging about your newest Star Wars memorabilia to friends and family. This is why we bring our lightsabers to our customers so they can feel the same joy and awe that we do when wielding them. Our lightsabers are handcrafted with care to bring you closer to your favourite Star Wars character and even closer to the Force. We enjoy responding to questions and resolving any issues that arise. Includes coverage for flaws in original components and workmanship. We want to insure that you receive your. May The Force Be With You. We thank you for your support. 100% Satisfaction, Customized and Superb Quality. The item(s) pictured are the actual item(s) you will be receiving if you are the winner. For a return please message us asking for the return confirmation. CHECK OUT OUR OTHER ITEMS. This item is in the category “Collectibles\Science Fiction & Horror\Star Wars Collectibles\Lightsaber & Weapon Replicas”. The seller is “stridersabers” and is located in this country: US. This item can be shipped to Canada, United States.

Convention/Event: Star Wars Celebration
Brand: Striyder Sabers
Movie: VIII: The Last Jedi
Series: The Clone Wars
Type: Wand/Sword/Paraphernalia
Character: Luke Skywalker
Color: Black, Silver, Grey
Franchise: Star Wars
Product Line: Force FX

Star Wars Lightsaber Force FX Metal Hilt Luke Pixel Xenopixel 34 Fonts

Star Wars Lightsaber Luke Skywalker Xenopixel Smooth Swing Metal Hilt 34 Fonts. LED strip lighting in blade. Configurable settings and effects. Quick Twist Font Change. FOC can be turned ON/OFF. 3600Mah 18650 3.7V Safety protected battery. 2-3 Watts 4/8 ohm speaker great quality. Cal Kestis, Darth Vader. Hilt (Polished Alloy Metal). Allen Key and spare screws. Press and hold the LED button to bring out of sleep mode. You will hear a’Power On’ voice, and the LED button will turn on. Press the button once, quickly, to turn the blade on. The following controls activate when the blade is on, and are based. On the flash of the LED button light. 1 A quick press will initiate a single blaster deflect effect. 2 Press and hold the button for one flash, then release. This will initiate the drag effect. A quick press will end the drag effect. 3 Press and hold the button for two flashes, then release. This will initiate the color cycle. When the color you want shows, a quick press will end the color cycle. 4 Continue to hold the button past 2 flashes to turn off the blade. While the blade is off, the following controls are activated based on the flash of the LED button light. 1 Press and hold the button for one flash, then release. This will change the volume. There are 3 volume settings: Volume High, Volume Low, and Mute. 2 Press and hold the button for two flashes, then release. This will change the blade effect. There are 5 blade effects: Steady, Pulse, Rainbow Blade, Unstable, and Fire Blade. 3 Press and hold the button for three flashes, then release. This will change the blade mode. There are several blade modes, including Some pre-on effects. Blade effects will affect pre-ons, but will not have any effect on Blaster Blade and Ghost Blade modes. Only blade color and font selection impact these modes. 4 Press and hold the button for three flashes, then release. This will change the sound font. The selection of fonts can be customized by the user. There are several motion or manual controls available on the XenoPixel V2. 1 A direct and quick stabbing motion with the hilt level will turn the blade on, or off. 2A quick twist while the hilt is pointed down will change the font to the next on the list. Either direction will prompt the change as long as the hilt is pointed downward. 3A quick twist while the hilt is pointed up will play a music track, if one or more are available in the selected fonts folder. A quick twist again will stop the music. 4Hold the button and impact the hilt/blade to activate lockup. Release the button to end lockup. 5While holding the button, a quick twist while the hilt is pointed down will change the selected blade color. Release the button to select the current color. 6While holding the button, a quick twist while the hilt is pointed up will play a special effect. This will also play a sound if the correct file in included in the font. 50Watt neo pixel strip. Aluminum alloy 6063 hilt, Polycarbonate blade, Aluminium alloy 6063 hilt, Polycarbonate blade. Infinite colours with thousand kinds of colours. Time of charging & playing. 4-8 hours with a USB charging cable. High quality and the blade is very strong and will not break easily. 92cm long 2mm thickness bullet tip, 1 inch OD removable blade. Backwards protect system, Overload system, Over discharge system. CE:BSTXD200414606402EC, RHOS:C200511029004. We are fans of all things Star Wars, including cosplay, action figures, movies, and, of course, lightsabers. We could go on indefinitely. We don’t just bring you high-quality premium lightsabers, we also collect, play with, and enjoy displaying them in our homes and offices. We understand the thrill of reenacting your favourite Star Wars character, duelling with friends and foes, and bragging about your newest Star Wars memorabilia to friends and family. This is why we bring our lightsabers to our customers so they can feel the same joy and awe that we do when wielding them. Our lightsabers are handcrafted with care to bring you closer to your favourite Star Wars character and even closer to the Force. We enjoy responding to questions and resolving any issues that arise. Includes coverage for flaws in original components and workmanship. We want to insure that you receive your. May The Force Be With You. We thank you for your support. 100% Satisfaction, Customized and Superb Quality. The item(s) pictured are the actual item(s) you will be receiving if you are the winner. For a return please message us asking for the return confirmation. CHECK OUT OUR OTHER ITEMS. This item is in the category “Collectibles\Science Fiction & Horror\Star Wars Collectibles\Lightsaber & Weapon Replicas”. The seller is “stridersabers” and is located in this country: US. This item can be shipped to Canada, United States.

Character: Luke Skywalker
Movie: VIII: The Last Jedi
Product Line: Force FX
Series: The Clone Wars
Type: Wand/Sword/Paraphernalia
Color: Silver / Gold
Convention/Event: Star Wars Celebration
Brand: Striyder Sabers
Franchise: Star Wars

Star Wars Lightsaber RGB X Force FX Metal Hilt Heavy Dueling Smooth Swing

Star Wars Lightsaber RGB Blade Baseilt Smooth Swing Metal Hilt Heavy Duelling. Is the Newest Version Upgraded from 9 to 12 fonts. 12 sound set fonts. Quick Twist Font Change. FOC can be turned ON/OFF. Made for Heavy Duelling. Hilt (Polished Alloy Metal)-Size 27.5cm=. Blade-Thickness 2mm 92cm= 36 inches long. Allen Key and spare screws. We enjoy responding to questions and resolving any issues that arise. Press and hold the LED button to bring out of sleep mode. You will hear a’Power On’ voice, and the LED button will turn on. The saber is now in Wake mode. Watch this LED when controlling the saber, as listed in the table below. Press the button once quickly, to turn the saber blade on. When lightsaber is on. Press button once quickly. Hold for 1 LED Flash (0.5 seconds). Press button once to end lock-up. Hold for 2 LED Flashes (1 second). Cycles all possible colors; press button once to select. Hold for 3 LED Flashes (1.5 seconds). Cycles major colors only; press button once to select. Hold for 4 LED Flashes (2 Seconds). Saber is still in Wake mode. When lightsaber is off. Follow instructions from page 1. Volume high, Volume low and Mute. Stable, Unstable, and Pulse. Motion controls on or off. Does not affect font change on twist. Flash On Clash Toggle. Turns on and off flash on impact. Hold for 5 LED Flashes (2.5 Seconds). Selects the next sound font on the board. Hold for 10 Seconds. Also occurs after idle for 10 minutes. Includes coverage for flaws in original components and workmanship. We are fans of all things Star Wars, including cosplay, action figures, movies, and, of course, lightsabers. We could go on indefinitely. We understand the thrill of reenacting your favourite Star Wars character, duelling with friends and foes, and bragging about your newest Star Wars memorabilia to friends and family. This is why we bring our lightsabers to our customers so they can feel the same joy and awe that we do when wielding them. Our lightsabers are handcrafted with care to bring you closer to your favourite Star Wars character and even closer to the Force. We don’t just bring you high-quality premium lightsabers, we also collect, play with, and enjoy displaying them in our homes and offices. 14 years & up. Aluminum alloy 6063 hilt, Polycarbonate blade, Aluminium alloy 6063 hilt, Polycarbonate blade. Infinite colours with thousand kinds of colours. Lightsaber hilt, blade, USB charging cable. Time of charging & playing. 4-8 hours with a USB charging cable. High quality and the blade is very strong and will not break easily. 2-3 Watts, 4/8 ohm great quality. 92cm long 2mm thickness bullet tip, 1 inch OD removable blade. Backwards protect system, Overload system, Over discharge system. CE:BSTXD200414606402EC, RHOS:C200511029004. The R&D cost of the gravity sensor has been increased to make the smooth swing function more perfect. The sound effects have been expanded from 9 sets to 12, and 3 movie character lightsaber sound effects added to give you a more immersive duel experience. Developed and matched the motion control function, which was previously only available in the expensive Pixel models. You can also choose to turn on/off the function to decide whether to use button control or motion control. The FOC function has added the option to turn on/off. In previous version FOC function can only be turned on and cannot be turned off. But voice from fans, we know that FOC feature will make fans who participate in the competition miss out on points, so added is the on/off option so that you can turn off the FOC when you don’t need it. We want to insure that you receive your. May The Force Be With You. We thank you for your support. 100% Satisfaction, Customized and Superb Quality. The item(s) pictured are the actual item(s) you will be receiving if you are the winner. For a return please message us asking for the return confirmation. CHECK OUT OUR OTHER ITEMS. This item is in the category “Collectibles\Science Fiction & Horror\Star Wars Collectibles\Lightsaber & Weapon Replicas”. The seller is “stridersabers” and is located in this country: US. This item can be shipped to Canada, United States.

Convention/Event: Star Wars Celebration
Brand: Striyder Sabers
Movie: VII:The Force Awakens
Series: The Clone Wars
Type: Wand/Sword/Paraphernalia
Character: Darth Vader
Color: Black Silver
Franchise: Star Wars
Modified Item: No
Product Line: Force FX

Star Wars Lightsaber Force FX Metal Hilt Pixel Xenopixel 34 Fonts

Star Wars Lightsaber 12 Font Xenopixel Smooth Swing Metal Hilt Heavy Duelling. LED strip lighting in blade. Configurable settings and effects. Quick Twist Font Change. FOC can be turned ON/OFF. 3600Mah 18650 3.7V Safety protected battery. 2-3 Watts 4/8 ohm speaker great quality. Cal Kestis, Darth Vader. Usb type C charging cable. Hilt (Polished Alloy Metal). Allen Key and spare screws. Press and hold the LED button to bring out of sleep mode. You will hear a’Power On’ voice, and the LED button will turn on. Press the button once, quickly, to turn the blade on. The following controls activate when the blade is on, and are based. On the flash of the LED button light. 1 A quick press will initiate a single blaster deflect effect. 2 Press and hold the button for one flash, then release. This will initiate the drag effect. A quick press will end the drag effect. 3 Press and hold the button for two flashes, then release. This will initiate the color cycle. When the color you want shows, a quick press will end the color cycle. 4 Continue to hold the button past 2 flashes to turn off the blade. While the blade is off, the following controls are activated based on the flash of the LED button light. 1 Press and hold the button for one flash, then release. This will change the volume. There are 3 volume settings: Volume High, Volume Low, and Mute. 2 Press and hold the button for two flashes, then release. This will change the blade effect. There are 5 blade effects: Steady, Pulse, Rainbow Blade, Unstable, and Fire Blade. 3 Press and hold the button for three flashes, then release. This will change the blade mode. There are several blade modes, including Some pre-on effects. Blade effects will affect pre-ons, but will not have any effect on Blaster Blade and Ghost Blade modes. Only blade color and font selection impact these modes. 4 Press and hold the button for three flashes, then release. This will change the sound font. The selection of fonts can be customized by the user. There are several motion or manual controls available on the XenoPixel V2. 1 A direct and quick stabbing motion with the hilt level will turn the blade on, or off. 2A quick twist while the hilt is pointed down will change the font to the next on the list. Either direction will prompt the change as long as the hilt is pointed downward. 3A quick twist while the hilt is pointed up will play a music track, if one or more are available in the selected fonts folder. A quick twist again will stop the music. 4Hold the button and impact the hilt/blade to activate lockup. Release the button to end lockup. 5While holding the button, a quick twist while the hilt is pointed down will change the selected blade color. Release the button to select the current color. 6While holding the button, a quick twist while the hilt is pointed up will play a special effect. This will also play a sound if the correct file in included in the font. 50Watt neo pixel strip. Aluminum alloy 6063 hilt, Polycarbonate blade, Aluminium alloy 6063 hilt, Polycarbonate blade. Infinite colours with thousand kinds of colours. Time of charging & playing. 4-8 hours with a USB charging cable. High quality and the blade is very strong and will not break easily. 92cm long 2mm thickness bullet tip, 1 inch OD removable blade. Backwards protect system, Overload system, Over discharge system. CE:BSTXD200414606402EC, RHOS:C200511029004. We are fans of all things Star Wars, including cosplay, action figures, movies, and, of course, lightsabers. We could go on indefinitely. We don’t just bring you high-quality premium lightsabers, we also collect, play with, and enjoy displaying them in our homes and offices. We understand the thrill of reenacting your favourite Star Wars character, duelling with friends and foes, and bragging about your newest Star Wars memorabilia to friends and family. This is why we bring our lightsabers to our customers so they can feel the same joy and awe that we do when wielding them. Our lightsabers are handcrafted with care to bring you closer to your favourite Star Wars character and even closer to the Force. We enjoy responding to questions and resolving any issues that arise. Includes coverage for flaws in original components and workmanship. We want to insure that you receive your. May The Force Be With You. We thank you for your support. 100% Satisfaction, Customized and Superb Quality. The item(s) pictured are the actual item(s) you will be receiving if you are the winner. For a return please message us asking for the return confirmation. CHECK OUT OUR OTHER ITEMS. This item is in the category “Collectibles\Science Fiction & Horror\Star Wars Collectibles\Lightsaber & Weapon Replicas”. The seller is “stridersabers” and is located in this country: US. This item can be shipped to Canada, United States.

Character: Luke Skywalker
Movie: VIII: The Last Jedi
Product Line: Force FX
Series: The Clone Wars
Type: Wand/Sword/Paraphernalia
Color: Silver / Gold
Convention/Event: Star Wars Celebration
Brand: Striyder Sabers
Franchise: Star Wars

Star Wars Lightsaber Force FX Metal Hilt Luke Neo Pixel Xenopixel 34 Fonts

Star Wars Lightsaber Force FX Metal Hilt Luke Neo Pixel Xenopixel 34 Fonts. Star Wars Lightsaber Luke Skywalker Xenopixel Smooth Swing Metal Hilt 34 Fonts. LED strip lighting in blade. Configurable settings and effects. Quick Twist Font Change. FOC can be turned ON/OFF. 3600Mah 18650 3.7V Safety protected battery. 2-3 Watts 4/8 ohm speaker great quality. Cal Kestis, Darth Vader. Hilt (Polished Alloy Metal). Allen Key and spare screws. Press and hold the LED button to bring out of sleep mode. You will hear a’Power On’ voice, and the LED button will turn on. Press the button once, quickly, to turn the blade on. The following controls activate when the blade is on, and are based. On the flash of the LED button light. 1 A quick press will initiate a single blaster deflect effect. 2 Press and hold the button for one flash, then release. This will initiate the drag effect. A quick press will end the drag effect. 3 Press and hold the button for two flashes, then release. This will initiate the color cycle. When the color you want shows, a quick press will end the color cycle. 4 Continue to hold the button past 2 flashes to turn off the blade. While the blade is off, the following controls are activated based on the flash of the LED button light. 1 Press and hold the button for one flash, then release. This will change the volume. There are 3 volume settings: Volume High, Volume Low, and Mute. 2 Press and hold the button for two flashes, then release. This will change the blade effect. There are 5 blade effects: Steady, Pulse, Rainbow Blade, Unstable, and Fire Blade. 3 Press and hold the button for three flashes, then release. This will change the blade mode. There are several blade modes, including Some pre-on effects. Blade effects will affect pre-ons, but will not have any effect on Blaster Blade and Ghost Blade modes. Only blade color and font selection impact these modes. 4 Press and hold the button for three flashes, then release. This will change the sound font. The selection of fonts can be customized by the user. There are several motion or manual controls available on the XenoPixel V2. 1 A direct and quick stabbing motion with the hilt level will turn the blade on, or off. 2A quick twist while the hilt is pointed down will change the font to the next on the list. Either direction will prompt the change as long as the hilt is pointed downward. 3A quick twist while the hilt is pointed up will play a music track, if one or more are available in the selected fonts folder. A quick twist again will stop the music. 4Hold the button and impact the hilt/blade to activate lockup. Release the button to end lockup. 5While holding the button, a quick twist while the hilt is pointed down will change the selected blade color. Release the button to select the current color. 6While holding the button, a quick twist while the hilt is pointed up will play a special effect. This will also play a sound if the correct file in included in the font. 50Watt neo pixel strip. Aluminum alloy 6063 hilt, Polycarbonate blade, Aluminium alloy 6063 hilt, Polycarbonate blade. Infinite colours with thousand kinds of colours. Time of charging & playing. 4-8 hours with a USB charging cable. High quality and the blade is very strong and will not break easily. 92cm long 2mm thickness bullet tip, 1 inch OD removable blade. Backwards protect system, Overload system, Over discharge system. CE:BSTXD200414606402EC, RHOS:C200511029004. We are fans of all things Star Wars, including cosplay, action figures, movies, and, of course, lightsabers. We could go on indefinitely. We don’t just bring you high-quality premium lightsabers, we also collect, play with, and enjoy displaying them in our homes and offices. We understand the thrill of reenacting your favourite Star Wars character, duelling with friends and foes, and bragging about your newest Star Wars memorabilia to friends and family. This is why we bring our lightsabers to our customers so they can feel the same joy and awe that we do when wielding them. Our lightsabers are handcrafted with care to bring you closer to your favourite Star Wars character and even closer to the Force. We enjoy responding to questions and resolving any issues that arise. Includes coverage for flaws in original components and workmanship. We want to insure that you receive your. May The Force Be With You. We thank you for your support. 100% Satisfaction, Customized and Superb Quality. The item(s) pictured are the actual item(s) you will be receiving if you are the winner. For a return please message us asking for the return confirmation. CHECK OUT OUR OTHER ITEMS. This item is in the category “Collectibles\Science Fiction & Horror\Star Wars Collectibles\Lightsaber & Weapon Replicas”. The seller is “stridersabers” and is located in this country: US. This item can be shipped to Canada, United States.

Character: Luke Skywalker
Movie: VIII: The Last Jedi
Product Line: Force FX
Series: The Clone Wars
Type: Wand/Sword/Paraphernalia
Year: 2019
Color: Silver
Vintage: No
Convention/Event: Star Wars Celebration
Genre: Science Fiction & Horror
Brand: Striyder Sabers
Franchise: Star Wars

Star Wars Lightsaber Force FX Metal Hilt Luke Neo Pixel Xenopixel 34 Fonts

Star Wars Lightsaber Luke Skywalker Xenopixel Smooth Swing Metal Hilt 34 Fonts. LED strip lighting in blade. Configurable settings and effects. Quick Twist Font Change. FOC can be turned ON/OFF. 3600Mah 18650 3.7V Safety protected battery. 2-3 Watts 4/8 ohm speaker great quality. Cal Kestis, Darth Vader. Usb type C charging cable. Hilt (Polished Alloy Metal). Allen Key and spare screws. Press and hold the LED button to bring out of sleep mode. You will hear a’Power On’ voice, and the LED button will turn on. Press the button once, quickly, to turn the blade on. The following controls activate when the blade is on, and are based. On the flash of the LED button light. 1 A quick press will initiate a single blaster deflect effect. 2 Press and hold the button for one flash, then release. This will initiate the drag effect. A quick press will end the drag effect. 3 Press and hold the button for two flashes, then release. This will initiate the color cycle. When the color you want shows, a quick press will end the color cycle. 4 Continue to hold the button past 2 flashes to turn off the blade. While the blade is off, the following controls are activated based on the flash of the LED button light. 1 Press and hold the button for one flash, then release. This will change the volume. There are 3 volume settings: Volume High, Volume Low, and Mute. 2 Press and hold the button for two flashes, then release. This will change the blade effect. There are 5 blade effects: Steady, Pulse, Rainbow Blade, Unstable, and Fire Blade. 3 Press and hold the button for three flashes, then release. This will change the blade mode. There are several blade modes, including Some pre-on effects. Blade effects will affect pre-ons, but will not have any effect on Blaster Blade and Ghost Blade modes. Only blade color and font selection impact these modes. 4 Press and hold the button for three flashes, then release. This will change the sound font. The selection of fonts can be customized by the user. There are several motion or manual controls available on the XenoPixel V2. 1 A direct and quick stabbing motion with the hilt level will turn the blade on, or off. 2A quick twist while the hilt is pointed down will change the font to the next on the list. Either direction will prompt the change as long as the hilt is pointed downward. 3A quick twist while the hilt is pointed up will play a music track, if one or more are available in the selected fonts folder. A quick twist again will stop the music. 4Hold the button and impact the hilt/blade to activate lockup. Release the button to end lockup. 5While holding the button, a quick twist while the hilt is pointed down will change the selected blade color. Release the button to select the current color. 6While holding the button, a quick twist while the hilt is pointed up will play a special effect. This will also play a sound if the correct file in included in the font. 50Watt neo pixel strip. Aluminum alloy 6063 hilt, Polycarbonate blade, Aluminium alloy 6063 hilt, Polycarbonate blade. Infinite colours with thousand kinds of colours. Time of charging & playing. 4-8 hours with a USB charging cable. High quality and the blade is very strong and will not break easily. 92cm long 2mm thickness bullet tip, 1 inch OD removable blade. Backwards protect system, Overload system, Over discharge system. CE:BSTXD200414606402EC, RHOS:C200511029004. We are fans of all things Star Wars, including cosplay, action figures, movies, and, of course, lightsabers. We could go on indefinitely. We don’t just bring you high-quality premium lightsabers, we also collect, play with, and enjoy displaying them in our homes and offices. We understand the thrill of reenacting your favourite Star Wars character, duelling with friends and foes, and bragging about your newest Star Wars memorabilia to friends and family. This is why we bring our lightsabers to our customers so they can feel the same joy and awe that we do when wielding them. Our lightsabers are handcrafted with care to bring you closer to your favourite Star Wars character and even closer to the Force. We enjoy responding to questions and resolving any issues that arise. Includes coverage for flaws in original components and workmanship. We want to insure that you receive your. May The Force Be With You. We thank you for your support. 100% Satisfaction, Customized and Superb Quality. The item(s) pictured are the actual item(s) you will be receiving if you are the winner. For a return please message us asking for the return confirmation. CHECK OUT OUR OTHER ITEMS. This item is in the category “Collectibles\Science Fiction & Horror\Star Wars Collectibles\Lightsaber & Weapon Replicas”. The seller is “striydersabers” and is located in this country: US. This item can be shipped to Canada, United States.

Character: Luke Skywalker
Movie: VIII: The Last Jedi
Product Line: Force FX
Series: The Clone Wars
Type: Wand/Sword/Paraphernalia
Color: Silver / Gold
Convention/Event: Star Wars Celebration
Brand: Striyder Sabers
Franchise: Star Wars

Star Wars Lightsaber RGB X Force FX Metal Hilt Heavy Dueling Smooth Swing

Star Wars Lightsaber RGB-X Blade Baseilt Smooth Swing Metal Hilt Heavy Duelling. Is the Newest Version Upgraded from 9 to 12 fonts. 12 sound set fonts. Quick Twist Font Change. FOC can be turned ON/OFF. Made for Heavy Duelling. Hilt (Polished Alloy Metal)-Size 27.5cm=. Blade-Thickness 2mm 92cm= 36 inches long. Allen Key and spare screws. We enjoy responding to questions and resolving any issues that arise. Press and hold the LED button to bring out of sleep mode. You will hear a’Power On’ voice, and the LED button will turn on. The saber is now in Wake mode. Watch this LED when controlling the saber, as listed in the table below. Press the button once quickly, to turn the saber blade on. When lightsaber is on. Press button once quickly. Hold for 1 LED Flash (0.5 seconds). Press button once to end lock-up. Hold for 2 LED Flashes (1 second). Cycles all possible colors; press button once to select. Hold for 3 LED Flashes (1.5 seconds). Cycles major colors only; press button once to select. Hold for 4 LED Flashes (2 Seconds). Saber is still in Wake mode. When lightsaber is off. Follow instructions from page 1. Volume high, Volume low and Mute. Stable, Unstable, and Pulse. Motion controls on or off. Does not affect font change on twist. Flash On Clash Toggle. Turns on and off flash on impact. Hold for 5 LED Flashes (2.5 Seconds). Selects the next sound font on the board. Hold for 10 Seconds. Also occurs after idle for 10 minutes. Includes coverage for flaws in original components and workmanship. We are fans of all things Star Wars, including cosplay, action figures, movies, and, of course, lightsabers. We could go on indefinitely. We understand the thrill of reenacting your favourite Star Wars character, duelling with friends and foes, and bragging about your newest Star Wars memorabilia to friends and family. This is why we bring our lightsabers to our customers so they can feel the same joy and awe that we do when wielding them. Our lightsabers are handcrafted with care to bring you closer to your favourite Star Wars character and even closer to the Force. We don’t just bring you high-quality premium lightsabers, we also collect, play with, and enjoy displaying them in our homes and offices. 14 years & up. Aluminum alloy 6063 hilt, Polycarbonate blade, Aluminium alloy 6063 hilt, Polycarbonate blade. Infinite colours with thousand kinds of colours. Lightsaber hilt, blade, USB charging cable. Time of charging & playing. 4-8 hours with a USB charging cable. High quality and the blade is very strong and will not break easily. 2-3 Watts, 4/8 ohm great quality. 92cm long 2mm thickness bullet tip, 1 inch OD removable blade. Backwards protect system, Overload system, Over discharge system. CE:BSTXD200414606402EC, RHOS:C200511029004. The R&D cost of the gravity sensor has been increased to make the smooth swing function more perfect. The sound effects have been expanded from 9 sets to 12, and 3 movie character lightsaber sound effects added to give you a more immersive duel experience. Developed and matched the motion control function, which was previously only available in the expensive Pixel models. You can also choose to turn on/off the function to decide whether to use button control or motion control. The FOC function has added the option to turn on/off. In previous version FOC function can only be turned on and cannot be turned off. But voice from fans, we know that FOC feature will make fans who participate in the competition miss out on points, so added is the on/off option so that you can turn off the FOC when you don’t need it. We want to insure that you receive your. May The Force Be With You. We thank you for your support. 100% Satisfaction, Customized and Superb Quality. The item(s) pictured are the actual item(s) you will be receiving if you are the winner. For a return please message us asking for the return confirmation. CHECK OUT OUR OTHER ITEMS. This item is in the category “Collectibles\Science Fiction & Horror\Star Wars Collectibles\Lightsaber & Weapon Replicas”. The seller is “striydersabers” and is located in this country: US. This item can be shipped to Canada, United States.

Character: Darth Vader
Movie: VIII: The Last Jedi
Product Line: Force FX
Series: The Clone Wars
Type: Wand/Sword/Paraphernalia
Color: Black
Convention/Event: Star Wars Celebration
Brand: Striyder Sabers
Franchise: Star Wars

Star Wars Lightsaber RGB X Luke Skywalker Metal Hilt Heavy Duelling Smooth Swing

Star Wars Lightsaber Luke Skywalker Force FX Metal Hilt RGB-X Heavy Dueling Smooth Swing. Is the Newest Version Upgraded from 9 to 12 fonts. 12 sound set fonts. Quick Twist Font Change. FOC can be turned ON/OFF. Made for Heavy Duelling. Hilt (Polished Alloy Metal)-Size 27.5cm=. Blade-Thickness 2mm 92cm= 36 inches long. Allen Key and spare screws. Press and hold the LED button to bring out of sleep mode. You will hear a’Power On’ voice, and the LED button will turn on. The saber is now in Wake mode. Watch this LED when controlling the saber, as listed in the table below. Press the button once quickly, to turn the saber blade on. When lightsaber is on. Press button once quickly. Hold for 1 LED Flash (0.5 seconds). Press button once to end lock-up. Hold for 2 LED Flashes (1 second). Cycles all possible colors; press button once to select. Hold for 3 LED Flashes (1.5 seconds). Cycles major colors only; press button once to select. Hold for 4 LED Flashes (2 Seconds). Saber is still in Wake mode. When lightsaber is off. Follow instructions from page 1. Volume high, Volume low and Mute. Stable, Unstable, and Pulse. Motion controls on or off. Does not affect font change on twist. Flash On Clash Toggle. Turns on and off flash on impact. Hold for 5 LED Flashes (2.5 Seconds). Selects the next sound font on the board. Hold for 10 Seconds. Also occurs after idle for 10 minutes. Includes coverage for flaws in original components and workmanship. We want to insure that you receive your. Thank you for shopping with Striyder. This item is in the category “Collectibles\Science Fiction & Horror\Star Wars Collectibles\Lightsaber & Weapon Replicas”. The seller is “striydersabers” and is located in this country: US. This item can be shipped to Canada, United States.

Character: Luke Skywalker
Movie: VI:Return of the Jedi
Product Line: Force FX
Series: Clone Wars
Type: Wand/Sword/Paraphernalia
Color: Silver
Convention/Event: Star Wars Celebration
Brand: Striyder
Franchise: Star Wars

M	T	W	T	F	S	S
« Oct
				1	2	3
4	5	6	7	8	9	10
11	12	13	14	15	16	17
18	19	20	21	22	23	24
25	26	27	28	29	30