3.5ft Animated LED Seasonal Yoda Christmas Motion Activated STARWARS Disney NIB

STARWARS Disney 3.5ft Animated LED Seasonal Yoda Christmas Motion Activated NEW. Brand New – Sealed / Unopened Box. Please see the photos as they are part of the description – ask questions as needed. Thank you for your interest in our listing. At DavesOddNEnds with a focus on the. , we get our merchandise from a variety of sources and sell both new and preowned items. Every effort is made to describe and photograph items to the best of our ability – we’ll point out possible blemishes or imperfections as best we can. Your SATISFACTION is very important to us. Questions about the item, description or photographs, please message us. Unless otherwise requested. May also be used when appropriate. Additionally, we welcome you to follow.

Star Wars 1977 Original Motion Picture Soundtrack Double Vinyl Record Vintage

Star Wars 1977 (Original Motion Picture Soundtrack). In Excellent Used Condition Rare and Hard to find! Don’t Miss Your Chance to Own This Piece of Star Wars History! Star Wars (Original Motion Picture Soundtrack) is the soundtrack album to the 1977 film Star Wars, composed and conducted by John Williams and performed by the London Symphony Orchestra. Williams’ score for Star Wars was recorded over eight sessions at Anvil Studios in Denham, England on March 5, 8-12, 15 and 16, 1977. The score was orchestrated by Williams, Herbert W. Spencer, Alexander Courage, Angela Morley, Arthur Morton and Albert Woodbury. Spencer orchestrated the scores for The Empire Strikes Back and Return of the Jedi. The score was recorded by engineer Eric Tomlinson and edited by Kenneth Wannberg, and the scoring sessions were produced by Star Wars director George Lucas and supervised by Lionel Newman head of 20th Century Fox’s music department. The soundtrack album was released by 20th Century Records as a double-LP record in the United States in June 1977. The album’s main title peaked at No. 10 on the Billboard Hot 100, with a disco version of the film’s theme by Meco becoming a number one single hit in the United States in October 1977. Thanks For Looking and Please Check Out My Other Auctions!

March Of The First Order Lego Star Wars Stop Motion

Star Wars Force FX RGB Lightsaber Metal Hilt 34 Fonts Motion Control

2mm thickness 92 cm long OD 1 inch. Pre-power on, Blaster, Lock-up, Flash on clash, 12 sound set fonts, Quick Twist Font Change, Motion control. Volume Control, Infinite colour changing, Smooth Swing, FOC can be turned ON/OFF, Sleep Mode Aluminum alloys hilt, heavy duelling capable, Removable Battery, Rechargeable, Lockup?? L-Skywalker, Emperor, JUANSITH´S OBI EP III, DSR ElectricEssence, Angelic Plazma, JURASSIC, JUMP BIKE, STARGATE, ULTRON, THE BEGINNER, The Prize UnHinged, Sebulba, Dmaul, (Heavy). Hilt (Polished Alloy Metal). Allen Key and spare screws. Press and hold the LED button to bring out of sleep mode. You will hear a’Power On’ voice, and the LED button will turn on. The saber is now in Wake mode. Watch this LED when controlling the saber, as listed in the table below. Press the button once quickly, to turn the saber blade on. When lightsaber is on. Press button once quickly. Hold for 1 LED Flash (0.5 seconds). Press button once to end lock-up. Hold for 2 LED Flashes (1 second). Cycles all possible colors; press button once to select. Hold for 3 LED Flashes (1.5 seconds). Cycles major colors only; press button once to select. Hold for 4 LED Flashes (2 Seconds). Saber is still in Wake mode. When lightsaber is off. Follow instructions from page 1. Volume high, Volume low and Mute. Stable, Unstable, and Pulse. Motion controls on or off. Does not affect font change on twist. Flash On Clash Toggle. Turns on and off flash on impact. Hold for 5 LED Flashes (2.5 Seconds). Selects the next sound font on the board. Hold for 10 Seconds. Also occurs after idle for 10 minutes. Our team will work with you to resolve the problem and ensure your complete satisfaction. This is because sabers are designed for duelling and can incur damage during normal usage. At Strider Sabers, we are committed to providing the best quality products and customer service. Sometimes there are exceptions. Although the time frame may extend up to 20 days based on availability, weather, carrier issues or pandemics ETC.. Number and processing time. The item(s) pictured are the actual item(s) you will be receiving if you are the winner. For a return please message us asking for the return confirmation. CHECK OUT OUR OTHER ITEMS. This item is in the category “Collectibles\Science Fiction & Horror\Star Wars Collectibles\Lightsaber & Weapon Replicas”. The seller is “stridersabers” and is located in this country: CN. This item can be shipped to United States, Canada.

Convention/Event: Star Wars Celebration
Movie: VI:Return of the Jedi
Character: Anakin Skywalker
Signed: No
Franchise: Star Wars
Vintage: No
Brand: STRIDER SABERS
Series: The Clone Wars
Type: Wand/Sword/Paraphernalia
Year: 2023
Genre: Science Fiction & Horror
Country/Region of Manufacture: China
Product Line: Force FX

Star Wars Lightsaber Force FX Xenopixel Metal Hilt Motion Control 34 Fonts

Star Wars Lightsaber Force FX Metal Hilt Xenopixel 34 Fonts. Sometimes there are exceptions. Number and processing time. LED strip lighting in blade. Configurable settings and effects. Quick Twist Font Change. FOC can be turned ON/OFF. 3600Mah 18650 3.7V Safety protected battery. 2-3 Watts 4/8 ohm speaker great quality. Cal Kestis, Darth Vader. Hilt (Polished Alloy Metal). Allen Key and spare screws. Press and hold the LED button to bring out of sleep mode. You will hear a’Power On’ voice, and the LED button will turn on. Press the button once, quickly, to turn the blade on. The following controls activate when the blade is on, and are based. On the flash of the LED button light. 1 A quick press will initiate a single blaster deflect effect. 2 Press and hold the button for one flash, then release. This will initiate the drag effect. A quick press will end the drag effect. 3 Press and hold the button for two flashes, then release. This will initiate the color cycle. When the color you want shows, a quick press will end the color cycle. 4 Continue to hold the button past 2 flashes to turn off the blade. While the blade is off, the following controls are activated based on the flash of the LED button light. 1 Press and hold the button for one flash, then release. This will change the volume. There are 3 volume settings: Volume High, Volume Low, and Mute. 2 Press and hold the button for two flashes, then release. This will change the blade effect. There are 5 blade effects: Steady, Pulse, Rainbow Blade, Unstable, and Fire Blade. 3 Press and hold the button for three flashes, then release. This will change the blade mode. There are several blade modes, including Some pre-on effects. Blade effects will affect pre-ons, but will not have any effect on Blaster Blade and Ghost Blade modes. Only blade color and font selection impact these modes. 4 Press and hold the button for three flashes, then release. This will change the sound font. The selection of fonts can be customized by the user. There are several motion or manual controls available on the XenoPixel V2. 1 A direct and quick stabbing motion with the hilt level will turn the blade on, or off. 2A quick twist while the hilt is pointed down will change the font to the next on the list. Either direction will prompt the change as long as the hilt is pointed downward. 3A quick twist while the hilt is pointed up will play a music track, if one or more are available in the selected fonts folder. A quick twist again will stop the music. 4Hold the button and impact the hilt/blade to activate lockup. Release the button to end lockup. 5While holding the button, a quick twist while the hilt is pointed down will change the selected blade color. Release the button to select the current color. 6While holding the button, a quick twist while the hilt is pointed up will play a special effect. This will also play a sound if the correct file in included in the font. 50Watt LED Pixelated led strip inside the blade. Aluminum alloy 6063 hilt, Polycarbonate blade, Aluminium alloy 6063 hilt, Polycarbonate blade. Infinite colours with thousand kinds of colours. Time of charging & playing. 4-8 hours with a USB charging cable. High quality and the blade is very strong and will not break easily. 92cm long 2mm thickness bullet tip, 1 inch OD removable blade. Backwards protect system, Overload system, Over discharge system. CE:BSTXD200414606402EC, RHOS:C200511029004. We are fans of all things Star Wars, including cosplay, action figures, movies, and, of course, lightsabers. We could go on indefinitely. We don’t just bring you high-quality premium lightsabers, we also collect, play with, and enjoy displaying them in our homes and offices. We understand the thrill of reenacting your favourite Star Wars character, duelling with friends and foes, and bragging about your newest Star Wars memorabilia to friends and family. This is why we bring our lightsabers to our customers so they can feel the same joy and awe that we do when wielding them. Our lightsabers are handcrafted with care to bring you closer to your favourite Star Wars character and even closer to the Force. We enjoy responding to questions and resolving any issues that arise. Includes coverage for flaws in original components and workmanship. We want to insure that you receive your precious cargo. May The Force Be With You. We thank you for your support. 100% Satisfaction, Customized and Superb Quality. The item(s) pictured are the actual item(s) you will be receiving if you are the winner. For a return please message us asking for the return confirmation. CHECK OUT OUR OTHER ITEMS. This item is in the category “Collectibles\Science Fiction & Horror\Star Wars Collectibles\Other Star Wars Collectibles”. The seller is “stridersabers” and is located in this country: CN. This item can be shipped to North, South, or Latin America.

Convention/Event: Star Wars Celebration
Movie: IV:Star Wars
Series: The Mandalorian
Character: Darth Vader
Year: 2022
Modified Item: No
Vintage: No

Star Wars Mandalorian The Child Animatronic Edition with Over 25 Sound & Motion

The Child Animatronic Edition. With Over 25 Sound. SERIES-INSPIRED SOUNDS: Touch the top of The Child Animatronic Edition’s head to activate sound effects inspired by The Mandalorian, including happy and excited, giggles and babbles, tired and sleeping, and Force effects sounds. ANIMATED TOY: Features motorized movements, including a head that moves up and down, ears that move back and forth, eyes that open and close, and more. FORCE ACTIVATION: Boys and girls ages 4 and up will love patting The Child Animatronic Edition’s head 3 times for Force activation, in which the animatronic toy will raise its arm, close its eyes, and sigh, as if using the Force. FORCE NAP: Pretending to channel the Force takes a whole lot of energy and requires a lot of rest. Lay The Child toy down and it will close its eyes and take a “Force nap”. STYLED AFTER THE DISNEY PLUS SERIES: Star Wars The Child Animatronic Edition is inspired by the fan-favorite character from The Mandalorian and includes a removable Mandalorian pendant necklace and premium soft goods robe. Please view and ask all question pertaining to. This item is in the category “Collectibles\Science Fiction & Horror\Star Wars Collectibles\Other Star Wars Collectibles”. The seller is “missinglinktv” and is located in this country: US. This item can be shipped to United States.

Brand: Mattel
Convention/Event: Star Wars Celebration
Series: The Mandalorian
Movie: IV:Star Wars
Character: The Child
Year: 2020
Genre: Science Fiction & Horror
Franchise: Star Wars
Country/Region of Manufacture: China
Modified Item: No
Vintage: No

November 2024
M	T	W	T	F	S	S
« Oct
				1	2	3
4	5	6	7	8	9	10
11	12	13	14	15	16	17
18	19	20	21	22	23	24
25	26	27	28	29	30