Star Wars Darth Vader Helmet by Master Replicas 2005 EFX Signature Edition By CH

This is one of a kind and collector’s item of a replica from Star Wars Revenge of the Sith, Episode III. The same mold was used to create this helmet in a limited quantity. This darth vader helmet is not a toy but a fine art that can be exhibited or displayed. It comes in three pieces that are leather lined and real sunglasses like glasses. All fiberglass construction with a high polished finish. The helmet is in perfect like-new condition with no scratches or marks. This helmet was mostly stored in its original velvet cases with occasional displays in a glass cabinet. I will entertain any questions and will upload more photos soon.

Star Wars Darth Vader Helmet by Master Replicas 2007

Star Wars Darth Vader Helmet by Master Replicas 2007.

Star Wars Master Replicas scaled lightsaber lot of 26 with chase & exclusives +

I have been a long time Star Wars collector and have been listing several items across many licenses. If any were displayed, it was in a case out of sunlight. These are replicas at approximately. 45 scale and not actual size. There are 4 duplicates in this lot as noted below. Most of these items are older than 20 years and kept in storage. Boxes may have defects from original manufacturing or distribution, shelf wear, dents, or glue seams may be loose. SW-300 Luke Skywalker Episode VI. SW-301 Obi-Wan Kenobi Episode II. SW-302 Mace Windu Episode II. SW-303 Obi-Wan Kenobi (As First Built 2004 exclusive). SW-304 Obi-Wan Kenobi (Collector’s Society exclusive w/gold highlights). SW-306 Darth Vader Episode IV. SW-307 Count Dooku Episode II. SW-308 Darth Maul Episode I. SW-311 Obi-Wan Kenobi Episode III. SW-311 Obi-Wan Kenobi Episode III (Gold chase). SW-315 Darth Sidious Episode III. SW-317 Yoda Episode III. SW-323 Obi-Wan Kenobi Episode III (Celebration III exclusive- sealed). SW-323 Obi-Wan Kenobi Episode III (Celebration III exclusive). SW-331 Obi-Wan Kenobi Episode IV. SW-332 Luke Skywalker Episode V. SW-328C Yoda Episode III (2005 convention exclusive). SW-326 Anakin Skywalker Episode III (Star Wars Shop exclusive). SW-400 Darth Maul Episode I (2005 Collector’s Society exclusive). SW-401 Mace Windu (2006 Collector’s Society exclusive). SW-402 Qui-Gon Jinn Episode I (2007 Collector’s Society exclusive). SW-361 Medal of Yavin.

Star Wars Darth Vader Helmet by Master Replicas 2007

Star Wars Darth Vader Helmet by Master Replicas 2007.

Master Replicas Star Wars Imperial Shock Trooper Helmet

This incredible Master Replicas Star Wars Imperial Shock Trooper Helmet is a must-have for any true Star Wars fan. With its stunning design and attention to detail, this helmet is sure to impress. Whether you’re wearing it to a Star Wars Celebration or adding it to your collection of Star Wars memorabilia, this helmet is the perfect addition. Featuring the iconic Shock Trooper character from III:Revenge of the Sith, this helmet is a replica of the original from the Prequel Trilogy. Made with high-quality materials, it is built to last. This helmet is not only a fantastic collectible, but it is also a great costume accessory for any science fiction and horror fan.

Star Wars Darth Vader Lightsaber Umbrella Red Museum Replicas 2012 Sealed

The Handle Is Based Upon Darth Vader’s Lightsaber. The Shaft Has Been Beautifully Anodized In Iridescent Red.

Star Wars Master Replicas Rebel Snowspeeder Custom battle damage

Custom built Luke Skywalker Snowspeeder with battle damage. I originally built this at my house and entered it into a Colorado contest, where it got one of the 1st place ribbons. Sorry about some of the close ups, they don’t do this model justice, it was very difficult to get the lighting and macro shots to line up and cooperate together and I just couldn’t photograph the unblurred view of Bigg’s face. Properly, you’ll just have to see it in person. This item is in the category “Collectibles\Science Fiction & Horror\Star Wars Collectibles\Other Star Wars Collectibles”. The seller is “rotceh84″ and is located in this country: US. This item can be shipped to United States.

Convention/Event: Star Wars Celebration
Movie: IV:Star Wars
Character: Luke Skywalker
Signed: Yes
Franchise: Star Wars
Modified Item: Yes
Vintage: Yes
Brand: Hasbro
Series: Rebels
Year: 1980
Genre: Science Fiction & Horror
Country/Region of Manufacture: United States

Star Wars Lightsaber Master Replicas RGB Metal Hilt Luke Skywalker Galaxy Edge

Star Wars Lightsaber Master Replicas RGB Metal Hilt Luke Skywalker Galaxy Edge. Luke Pixel Profile Lightsaber Skywalker Smooth Swing Heavy Dueling 12 Light Colors 10 soundfonts Force FOC Metal Hilt Toys. 12 Color Changing Options. Utilize the wrench to loosen the screws in the hilt. Strong enough to duel. High quality polycarbonate blade and aluminum alloy hilt. Flash on clash. Flashes white and emits a sound upon strike. Includes USB charge cable; battery can be removed. Frosted aluminum alloy hilt, light diffusion polycarbonate blade. Six sets of sound. (1) USB charging cable. To wake the lightsaber. Hold down power button for 1 seconds. A sound will play and the light ring around the power button will illuminate. The saber is now in awake mode. Awake mode operation: Pressing the power button will turn the blade on and activate sounds and effects. When the blade is lit, the power button operates thusly. Tap – blaster deflection – Hold 0.5 second, button LED flash 1 time, then release – saber lock-up. Hold 1 seconds, button LED flash 2 times, then release to cycle rainbow blade colors. Once a desired color is reached, tap it to set the color. Hold 1.5 seconds, button LED flash 3 times, then release to cycle solid blade colors. This function have another version: Hold 1.5 seconds, button LED flash 3 times, then release-saber force. Hold 2 seconds powers off the blade. Button LED flash 4 times. When the blade is off, the power button operates thusly. Holding the power button down for 0.5 seconds, button LED flash 1 time, while the blade is off, but still in wake mode, let go of the button will select sound volume. Holding the power button down for 1 seconds, button LED flash 2 time, while the blade is off, but still in wake mode, will select a new light effects(stable, unstable, and pulse available). Holding the power button down for 1.5 seconds, button LED flash 3 time, while the blade is off, but still in wake mode, will select a new sound fonts. Holding 10 seconds to make the saber sleep. If the saber sits idle for 10 minutes it will also enter deep sleep again. When the saber is in deep sleep there will be no lights or sounds to keep power for long time. We are here to help you if you have any question regarding your order. We handle customer service as the most important task in our daily operation. Remember, we strive to keep all our customers satisfied. Your feedback is critical to our success! 4 out of 5 stars is unacceptable and considered a failure in our market. We strive to keep all our customers satisfy. This item is in the category “Collectibles\Science Fiction & Horror\Star Wars Collectibles\Other Star Wars Collectibles”. The seller is “knownsolutions” and is located in this country: US. This item can be shipped worldwide.

Character: Luke Skywalker
Series: Clone Wars
Vintage: No
Convention/Event: Star Wars Celebration
Genre: Science Fiction & Horror
Brand: Known Solutions
Franchise: Star Wars

Master Replicas Obi-Wan Kenobi Star Wars LIGHTSABER. 45 SW-323 Celebration III

Master Replicas Obi-Wan Kenobi Star Wars LIGHTSABER. 45 SW-323 Celebration III. Still has the unbroken seal. Great fun item that displays well. Condition is new with details described. I feel your pain. Great addition for any collector. Condition is used with details described. Please use photo references in case I overlook item description issues. I prefer not break up any lot auctions to sell any individual items. Not going to put a mint figure in a cheap cereal box. Bubble wrap is our best friend. We try to notify if there are any above average smells or smoke damage with our items. If making an offer, please make it reasonable. In turn, we can ensure great products to always be available for all buyers. The post office is overworked and packages are getting severely delayed. Please take this into consideration until after the holiday season. We are all in this together!!! This item is in the category “Collectibles\Science Fiction & Horror\Star Wars Collectibles\Other Star Wars Collectibles”. The seller is “toydropinc” and is located in this country: US. This item can be shipped to United States, Canada, United Kingdom, China, Mexico, Germany, Japan, France, Australia, Denmark, Romania, Slovakia, Bulgaria, Czech Republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Greece, Portugal, Cyprus, Slovenia, Sweden, Korea, South, Indonesia, Taiwan, South Africa, Thailand, Belgium, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Austria, Bahamas, Israel, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi Arabia, United Arab Emirates, Qatar, Kuwait, Bahrain, Croatia, Republic of, Malaysia, Chile, Colombia, Costa Rica, Dominican Republic, Panama, Trinidad and Tobago, Guatemala, El Salvador, Honduras, Jamaica, Antigua and Barbuda, Aruba, Belize, Dominica, Grenada, Saint Kitts-Nevis, Saint Lucia, Montserrat, Turks and Caicos Islands, Barbados, Bangladesh, Bermuda, Brunei Darussalam, Bolivia, Egypt, French Guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Cayman Islands, Liechtenstein, Sri Lanka, Luxembourg, Monaco, Macau, Martinique, Maldives, Nicaragua, Oman, Pakistan, Paraguay, Reunion, Uruguay.

Convention/Event: Star Wars Celebration
Character: Obi-Wan
Franchise: Star Wars

Luke Return of the Jedi ROTJ Lightsaber by SD Studios / Master Replicas

Here we have a VERY few, MINT-condition examples of the SD Studios Luke ROTJ Lightsaber replica. As most collectors know, Master Replicas started back in 2001 and our first two pieces were the Han Solo ANH blaster and the Luke ROTJ lightsaber. The first 1500 units of the Luke were made here in PA by a local machine shop. (the remainder of the run were manufactured in China). I had the opportunity to actually handle, measure, and photograph the original “hero” filming prop while it was on public display in a museum in Ohio. I then created the blueprints that were used to produce the replicas. So these are very accurate to the original, while being slightly “idealized” and generally cleaned-up, as the original was a bit sloppy in some areas. I received requests from fans and collectors to reproduce this particular piece. So I asked the shop to make a few extras and here they are. There will only be a FEW available. Once these are gone, they will be GONE. So these are made by the SAME shop that made the original MR US lightsabers, using the SAME blueprints and MOSTLY the same materials. The triangle indicators on the control box are cast resin instead of injected plastic, the top control panel is from a different supplier, and the “activator switch” is machined metal instead of plastic on the MR. These have the correct blue circuit board and I have even added the second tiny screw on the emitter that was on the original, but we left off the MR replicas. Otherwise, the entire saber is machined in 6061 aluminum and polished to the same beautiful luster as the original MR US sabers! The item “Luke Return of the Jedi ROTJ Lightsaber by SD Studios / Master Replicas” is in sale since Wednesday, December 8, 2021. This item is in the category “Collectibles\Science Fiction & Horror\Star Wars Collectibles\Other Star Wars Collectibles”. The seller is “sd-studios” and is located in Schwenksville, Pennsylvania. This item can be shipped worldwide.

Character: Luke Skywalker
Convention/Event: Star Wars Celebration
Movie: VI:Return of the Jedi

February 2025
M	T	W	T	F	S	S
« Jan
					1	2
3	4	5	6	7	8	9
10	11	12	13	14	15	16
17	18	19	20	21	22	23
24	25	26	27	28