ABS Armor and helmet parts only. This is a kit. And will need to be trimmed and assembled. 60g Glossy White ABS UV Stable. Plastic ABS Vacuumed formed parts only. See Parts list Below. Please note: This is a kit and it does require a medium level or higher skill in order to assemble it. Take your time assembling it will look great once put together. 2 set of ears (left and right). 1 Pair of shoulder bells (one sweep detail and one straight detail). 1 Pair of shoulder straps. 1 Ab-section with 2 separate button details. 1 Middle back (kidney) section. 1 Ammo belt front with three rivet covers. 4 Right arm sections, 2 bi-cep and 2 forearm. 4 Left arm sections, 2 bi-cep and 2 forearm. 5 Right leg sections, 2 thigh, 1 knee ammo belt and 2 shin/calf armor. 5 Left leg sections, 2 thigh, 1 knee plate and 2 shin/calf armor. 3 White plastic thermal detonator parts, 1 center detail and 2 end caps. Sheet of plastic to cover seams (ANH style). This is a cinematic, idealized version meaning it has sharper detail and easier to assemble than the cast from the screen worn version. It has been vacuum-formed in Glossy White ABS UV protected plastic and is 100% screen accurate. The armor and helmet for sale comes unassembled and is just the vacuumed formed pieces. The armor and helmet will need to be trimmed, sanded and assembled. The armor Glossy ABS plastic is 60g (1.57mm) thick, which is the same thickness as the original suits of armor worn in the Star wars films. The suit fits heights between 5’7″ – 6″2. The suit can be modified to fit huskier Troopers. Take your time assembling it it will look great once put together. The kit also comes with extra plastic for creating ANH Stormtrooper strips. There will be no instructions included but many helpful tutorials can be found on the web. This is a great chance to own and build your very own screen accurate ANH armor for a fraction of the cost. This set can be used for display or for trooping. The suit of armor was cast from a set of Armor I own. Once assembled, you can wear it to any Stormtrooper club you wish. You will only receive the plastic pieces and not any accessories needed to complete the armor. 1 set of ears (left and right).

ABS Armor and helmet parts only. This is a kit. And will need to be trimmed and assembled. 60g Glossy White ABS UV Stable. Plastic ABS Vacuumed formed parts only. See Parts list Below. Please note: This is a kit and it does require a medium level or higher skill in order to assemble it. Take your time assembling it will look great once put together. 2 set of ears (left and right). 1 Pair of shoulder bells (one sweep detail and one straight detail). 1 Pair of shoulder straps. 1 Ab-section with 2 separate button details. 1 Middle back (kidney) section. 1 Ammo belt front with three rivet covers. 4 Right arm sections, 2 bi-cep and 2 forearm. 4 Left arm sections, 2 bi-cep and 2 forearm. 5 Right leg sections, 2 thigh, 1 knee ammo belt and 2 shin/calf armor. 5 Left leg sections, 2 thigh, 1 knee plate and 2 shin/calf armor. 3 White plastic thermal detonator parts, 1 center detail and 2 end caps. Sheet of plastic to cover seams (ANH style). This is a cinematic, idealized version meaning it has sharper detail and easier to assemble than the cast from the screen worn version. It has been vacuum-formed in Glossy White ABS UV protected plastic and is 100% screen accurate. The armor and helmet for sale comes unassembled and is just the vacuumed formed pieces. The armor and helmet will need to be trimmed, sanded and assembled. The armor Glossy ABS plastic is 60g (1.57mm) thick, which is the same thickness as the original suits of armor worn in the Star wars films. The suit fits heights between 5’7″ – 6″2. The suit can be modified to fit huskier Troopers. Take your time assembling it it will look great once put together. The kit also comes with extra plastic for creating ANH Stormtrooper strips. There will be no instructions included but many helpful tutorials can be found on the web. This is a great chance to own and build your very own screen accurate ANH armor for a fraction of the cost. This set can be used for display or for trooping. The suit of armor was cast from a set of Armor I own. Once assembled, you can wear it to any Stormtrooper club you wish. You will only receive the plastic pieces and not any accessories needed to complete the armor. 1 set of ears (left and right).

Vacuumed Formed ABS Armor Parts only. This is a kit. And will need to be trimmed and assembled. 60g Glossy White ABS UV Stable. Plastic ABS Vacuumed formed parts only. See Parts list Below. Please note: This is a kit and it does require a medium level or higher skill in order to assemble it. Take your time assembling it will look great once put together. 1 Pair of shoulder bells (one sweep detail and one straight detail). 1 Pair of shoulder straps. 1 Ab-section with 2 separate button details. 1 Middle back (kidney) section. 1 Ammo belt front with three rivet covers. 4 Right arm sections, 2 bi-cep and 2 forearm. 4 Left arm sections, 2 bi-cep and 2 forearm. 5 Right leg sections, 2 thigh, 1 knee ammo belt and 2 shin/calf armor. 5 Left leg sections, 2 thigh, 1 knee plate and 2 shin/calf armor. 3 White plastic thermal detonator parts, 1 center detail and 2 end caps. Sheet of plastic to cover seams (ANH style). This is a cinematic, idealized version meaning it has sharper detail and easier to assemble than the cast from the screen worn version. It has been vacuum-formed in Glossy White ABS UV protected plastic and is 100% screen accurate. The armor and helmet for sale comes unassembled and is just the vacuumed formed pieces. The armor and helmet will need to be trimmed, sanded and assembled. The armor Glossy ABS plastic is 60g (1.57mm) thick, which is the same thickness as the original suits of armor worn in the Star wars films. The suit fits heights between 5’7″ – 6″2. The suit can be modified to fit huskier Troopers. Please note: This is a kit, and it does require a medium level or higher skill in order to assemble it. Take your time assembling it and will look great once put together. The kit also comes with extra plastic for creating ANH Stormtrooper strips. There will be no instructions included but many helpful tutorials can be found on the web. This is a great chance to own and build your very own screen accurate ANH armor for a fraction of the cost. This set can be used for display or for trooping. The suit of armor was cast from a set of Armor I own. Once assembled, you can wear it to any Stormtrooper club you wish. You will only receive the plastic pieces and not any accessories needed to complete the armor.

Vacuumed Formed ABS Armor Parts only. This is a kit. And will need to be trimmed and assembled. 60g Glossy White ABS UV Stable. Plastic ABS Vacuumed formed parts only. See Parts list Below. Please note: This is a kit and it does require a medium level or higher skill in order to assemble it. Take your time assembling it will look great once put together. 1 Pair of shoulder bells (one sweep detail and one straight detail). 1 Pair of shoulder straps. 1 Ab-section with 2 separate button details. 1 Middle back (kidney) section. 1 Ammo belt front with three rivet covers. 4 Right arm sections, 2 bi-cep and 2 forearm. 4 Left arm sections, 2 bi-cep and 2 forearm. 5 Right leg sections, 2 thigh, 1 knee ammo belt and 2 shin/calf armor. 5 Left leg sections, 2 thigh, 1 knee plate and 2 shin/calf armor. 3 White plastic thermal detonator parts, 1 center detail and 2 end caps. Sheet of plastic to cover seams (ANH style). This is a cinematic, idealized version meaning it has sharper detail and easier to assemble than the cast from the screen worn version. It has been vacuum-formed in Glossy White ABS UV protected plastic and is 100% screen accurate. The armor and helmet for sale comes unassembled and is just the vacuumed formed pieces. The armor and helmet will need to be trimmed, sanded and assembled. The armor Glossy ABS plastic is 60g (1.57mm) thick, which is the same thickness as the original suits of armor worn in the Star wars films. The suit fits heights between 5’7″ – 6″2. The suit can be modified to fit huskier Troopers. Please note: This is a kit, and it does require a medium level or higher skill in order to assemble it. Take your time assembling it and will look great once put together. The kit also comes with extra plastic for creating ANH Stormtrooper strips. There will be no instructions included but many helpful tutorials can be found on the web. This is a great chance to own and build your very own screen accurate ANH armor for a fraction of the cost. This set can be used for display or for trooping. The suit of armor was cast from a set of Armor I own. Once assembled, you can wear it to any Stormtrooper club you wish. You will only receive the plastic pieces and not any accessories needed to complete the armor.

Vacuumed Formed ABS Armor Parts only. This is a kit. And will need to be trimmed and assembled. 60g Glossy White ABS UV Stable. Plastic ABS Vacuumed formed parts only. See Parts list Below. Please note: This is a kit and it does require a medium level or higher skill in order to assemble it. Take your time assembling it will look great once put together. 1 Pair of shoulder bells (one sweep detail and one straight detail). 1 Pair of shoulder straps. 1 Ab-section with 2 separate button details. 1 Middle back (kidney) section. 1 Ammo belt front with three rivet covers. 4 Right arm sections, 2 bi-cep and 2 forearm. 4 Left arm sections, 2 bi-cep and 2 forearm. 5 Right leg sections, 2 thigh, 1 knee ammo belt and 2 shin/calf armor. 5 Left leg sections, 2 thigh, 1 knee plate and 2 shin/calf armor. 3 White plastic thermal detonator parts, 1 center detail and 2 end caps. Sheet of plastic to cover seams (ANH style). This is a cinematic, idealized version meaning it has sharper detail and easier to assemble than the cast from the screen worn version. It has been vacuum-formed in Glossy White ABS UV protected plastic and is 100% screen accurate. The armor and helmet for sale comes unassembled and is just the vacuumed formed pieces. The armor and helmet will need to be trimmed, sanded and assembled. The armor Glossy ABS plastic is 60g (1.57mm) thick, which is the same thickness as the original suits of armor worn in the Star wars films. The suit fits heights between 5’7″ – 6″2. The suit can be modified to fit huskier Troopers. Please note: This is a kit, and it does require a medium level or higher skill in order to assemble it. Take your time assembling it and will look great once put together. The kit also comes with extra plastic for creating ANH Stormtrooper strips. There will be no instructions included but many helpful tutorials can be found on the web. This is a great chance to own and build your very own screen accurate ANH armor for a fraction of the cost. This set can be used for display or for trooping. The suit of armor was cast from a set of Armor I own. Once assembled, you can wear it to any Stormtrooper club you wish. You will only receive the plastic pieces and not any accessories needed to complete the armor.

ABS Armor and helmet parts only. This is a kit. And will need to be trimmed and assembled. 60g Glossy White ABS UV Stable. This is a cinematic, idealized version meaning it has sharper detail and easier to assemble than the cast from the screen worn version. It has been vacuum-formed in Glossy White ABS UV protected plastic and is 100% screen accurate. The armor and helmet for sale comes unassembled and is just the vacuumed formed pieces. The armor and helmet will need to be trimmed, sanded and assembled. The armor Glossy ABS plastic is 60g (1.57mm) thick, which is the same thickness as the original suits of armor worn in the Star wars films. The suit fits heights between 5’7″ – 6″2. The suit can be modified to fit huskier Troopers. Please note: This is a kit and it does require a medium level or higher skill in order to assemble it. Take your time assembling it it will look great once put together. The kit also comes with extra plastic for creating ANH Stormtrooper strips. There will be no instructions included but many helpful tutorials can be found on the web. This is a great chance to own and build your very own screen accurate ANH armor for a fraction of the cost. This set can be used for display or for trooping. The suit of armor was cast from a set of Armor I own. Once assembled, you can wear it to any Stormtrooper club you wish. You will only receive the plastic pieces and not any accessories needed to complete the armor. This item is in the category “Collectibles\Science Fiction & Horror\Star Wars Collectibles\Other Star Wars Collectibles”. The seller is “makerofthings!” and is located in this country: US. This item can be shipped to United States.

• Character: Stormtrooper
• Country/Region of Manufacture: United States
• Movie: IV:Star Wars
• Convention/Event: Star Wars Celebration
• Genre: Science Fiction & Horror
• Brand: Star Wars A New Hope
• Franchise: Star Wars